I AM PRESENTLY TRYING TO WORK ON MY 94 T BIRD IGNITION SWITCH SO FAR NOTHING HAS WORKED . MY KEY WOULD NOT GO IN THE IGNITION AT ALL SO WE HAVE TRIED TO BANG IT AND PRESENTLY WE ARE DRILLING IT OUT SO FAR NOTHING WILL WORK UNLESS YOU CAN GET THE KEY IN THE INGITION THEN YOU ARE ALL GOOD YOU CAN THEN TURN THE KEY TO THE ASSCESORRY POSTION OR THE ON POSTION AND THEN THERE IS A LITTLE HOLE UNDER THE HOUSING WHICH YOU NEED TO GET A PUNCH TO BANG ON THAT LITTLE HOLE AS LONG AS YOU HAVE THE KEY IN THE IGNITION AND THEN YOU BANG THE HOLE THE IGNITION SHOULD SLIDE RIGHT OUT. OTHER THAN THAT IF YOU HAVE NO KEY? IM STILL WORKING ON THAT BYE.
To change the voltage regulator on a 1995 Ford Thunderbird, first you will need to disconnect the battery cables. Then, remove the bolts holding the regulator to the frame of the vehicle and the wires connecting it.
Where are the vacuum hoses on a 1995 ford thunderbird 4.6l engine?
A 1995 Ford Thunderbird is OBD I , EEC IV
A 1995 Ford Thunderbird , 4.6 liter V8 engine has ( 1 ) timing CHAIN to each cylinder head ( 2 timing CHAINS in total )
For a 1995 Ford Thunderbird , 4.6 : I believe that is rated at ( 205 horsepower from the factory )
how much hp does 1995 ford thunderbird have
in the trunk
no
No
For a 1995 Ford Thunderbird : ( " regular " unleaded gasoline , 87 octane )
no....the answer is no. sure you can all the 95s have the same trans would be a direct swap
Most likely it is the Ignition Control Module.