take it to the dealer
When changing the brake rotors on a 1990 Toyota 4runner the vehicle must be safely raised and propped up. The calipers must be loosen and rotors will be able to be removed. The process must be repeated for all four wheels.
I have a 97 T100 4wd. If it is a 2wd the front hub should be just like any other hub-remove the axle nut. The rear shaft and hub has a retainer on the axle on both 2wd and 4wd. On the front of the 4wd there is a cap screw in the end of the drive shaft and the hub is splined on the shaft-unscrew the bold and the hub should come off.
Get a shop manual for about $18 and it has pictures and everything.
if it. 4wd the wires on the front axle are for the axle diconnect to engage and disengage the 4wd. the wires on the rear axle axle are for the rear axle speed sensor. so the computer can actuate abs system
how do you remove front rotors from a chev 2004 silveraldo crewcab not 4wd
1500 or 2500???
You take it to AAMCO
are 2wd and 4wd front brake rotors interchangeable on 1997 ranger 4L V6 XLT
Yes as long as the truck is not a T100. The 92 and 93 model years were the same as far as the doors are concerned. The only difference you will see is between the 2wd and the 4wd. They had different marker lights in the front.
5.5 Quarts with oil/filter change.
1500 or 2500?? 6 lug or 8 ?
yes it has