Want this question answered?
use a 1/2 inch ratchet on the pivot point on the tensioner pulley, and turn to take tension off the belt...then slip the belt off all the other pulleys. install the new one, by squeezing it into a small loop that can be inserted into the space between the tensioner, and the idler pulley, loop it onto all the pulleys per the diagram located on radiator cowling, take tension off the tension pulley, to get it back on completely and release the tension slowly..making sure it is lined up correctly on all pulleys
facing the engine you turn to the right it is r/ hand thread if you look at tne bolt head which is behind the pulley
go to following link you will get the answer: http://www.wonderhowto.com/how-to-replace-brakes-2003-f150/
no adjusting bolt u have a serpentine belt.that has a tension pulley that automatically adjusts if belt is loose, u need to replace belt
6 with a filter change.
http://www.fordf150.net/howto/fuelfilter.php
6 quarts with filter change
Remove serpentine belt. Remove pulley. Install new pulley. Install serpentine belt.
where is the crankshaft position sensor a bank 1 circuit malfunction on a 2003 f150 at
how do i find the neutral, or clutch switch on a 2003 ford F150?
first you should release the belt tension pully and remove the belt. Then the idler pully has a bolt through the center remove the bolt and the pully should come off.
The tension on a 1988 Ford F150 can be loosened by adjusting the belt tensioner. The retaining bolt is loosened, the tensioner shifted slightly, and tightened down.