0
Easy... Remove the courtesy light and you will see the base of aerial. It has a metal cover over the mounting nut, so using a mole-wrench or similar grab hold of the cover and simply pull it straight down. Undo the nut that's underneath the cover, pull off the aerial cable and then you can then remove the aerial base.
What else can I help you with?
How do you change the aerial on your citroen c3 pluriel?
To change the aerial on a Citroën C3 Pluriel, first, remove the plastic cover around the base of the aerial by gently prying it off. Unscrew the aerial from its base, which may require a wrench or pliers depending on how tightly it is secured. Replace it with the new aerial by screwing it into the base and reattach the plastic cover. Ensure everything is snug and secure to prevent water leakage.
How do you change the roof lining in your ute?
giving access to the base of the aerial
How do you change EL falcon aerial?
To change the EL Falcon aerial, first, ensure the vehicle is turned off and disconnected from the battery for safety. Remove the old aerial by unscrewing it from its base, which may require a wrench or socket. Install the new aerial by screwing it into the base securely, then reconnect the battery and test the radio for signal clarity. If necessary, adjust the new aerial's angle for optimal reception.
How do you change a citroen Picasso car aerials?
To change the aerial on a Citroën Picasso, first, locate the base of the aerial, typically on the roof or rear of the vehicle. Carefully unscrew or unclip the old aerial from its base. Then, attach the new aerial by reversing the removal process, ensuring it's securely fastened. Finally, check the radio reception to confirm proper installation.
How do you change non powered aerial on Toyota Land Cruiser?
To change a non-powered aerial on a Toyota Land Cruiser, first, remove the base cover by unscrewing any visible screws or gently prying it off. Disconnect the aerial cable from the radio unit and unscrew the aerial from the mounting point on the vehicle. Replace it with the new aerial by reversing the process: screw it into place, reconnect the cable, and reattach the base cover securely. Ensure everything is tightened properly to avoid issues with reception.
How do you change an electric aerial on a Mitsubishi Shogun?
To change the electric aerial on a Mitsubishi Shogun, first, ensure the vehicle is turned off and disconnect the battery to avoid any electrical issues. Remove the interior trim panel surrounding the aerial to access the mounting screws. Disconnect the wiring harness and unscrew the aerial from its base, then replace it with the new aerial by reversing the steps. Finally, reconnect the battery and test the new aerial to ensure it functions properly.
How do you change the aerial on citroen c5 estate?
Open rear hatch, remove both D-pillar trim internally and pull back roof lining giving access to the base of the aerial. You can disconnect it from there.
How do you sort out a leak from the roof aerial into the interior light?
use silicone sealant around base of aerial
How do you remove aerial on a citroen?
To remove the aerial on a Citroën, first, locate the base of the aerial, usually on the roof or rear of the vehicle. Use a suitable tool, like a wrench or pliers, to unscrew the aerial from its base, turning it counterclockwise. If the aerial is connected by a wire, carefully disconnect it before fully removing the aerial. Always refer to the vehicle’s manual for specific instructions related to your model.
How do you change the aerial on a 1992 EB Falcon?
To change the aerial on a 1992 EB Falcon, first, ensure the vehicle is turned off and remove the radio fuse to avoid any electrical issues. Access the aerial by unscrewing it from its base, typically located on the front fender or roof. Disconnect the electrical connector and any retaining clips, then replace it with the new aerial by reversing the removal process. Once installed, reconnect the electrical connector and replace the radio fuse before testing the new aerial for functionality.
How do you replace aerial on suzuki grand vitara?
To replace the aerial on a Suzuki Grand Vitara, first, ensure the vehicle is turned off and disconnect the negative battery terminal. Remove the old aerial by unscrewing it from its base, which may require a wrench or pliers. Install the new aerial by screwing it into the base, ensuring it is secure. Finally, reconnect the battery terminal and test the new aerial for proper functionality.
What is the instrument called that has a base and an aerial and uses your hand to play?
SHAMAMA!!!!
