0
to change carrier bearings in rear differenial you have to remove the rear differential from the vehicle. then remove the cover. remove the bearing caps. remove differential carrier unit. remove bearings. install new bearings. and then reassemble.
recommend having a professional repair shop peform repairs
What else can I help you with?
How do you change a starter on a 1988 Toyota Cressida?
Change a starter on a 1988 Toyota Cressida
How do you change a brake light on a Toyota Cressida?
Don’t know
How do you replace air filter 1991 Toyota Cressida?
Change a air filter
How do you change wheel bearings on a 1991 Toyota pickup 2WD?
A wrench
How do you pack the rear wheel bearings on a 2002 Toyota Avalon?
you don't they are sealed bearings. they will need pressed out of the hub to change them.
How do you change front wheel bearings on 1997 Toyota rav4?
screw driver
How do you change wheel bearings on Toyota rav4?
Changing wheel bearings on a Toyota RAV4 is similar to other vehicles. After properly and safely removing the tire, the cowling should be removed giving access to the bearings. Be sure to clean the housing area and properly pack the bearings.
92 Toyota Previa I want to change the connecting rod bearings in the van can I do this?
no it is not a simple matter.
How do you change front wheel bearings 2001 Toyota Corolla?
can you grease the front wheel bearing s on a 2001 toyota corrolla without removing them. Is there a external greaese fitting.
How do you change the heater core in a 1986 Toyota Cressida?
To change the heater core in a 1986 Toyota Cressida, first, disconnect the negative battery cable and drain the coolant from the radiator. Remove the dashboard, which involves taking out screws and clips to access the heater core housing. Disconnect the hoses from the heater core and remove the core from the housing. Finally, install the new heater core, reassemble the dashboard, and refill the cooling system with coolant.
How many quarts of oil in 1991 Toyota Cressida?
A 1991 Toyota Cressida typically requires about 4.5 quarts of oil when equipped with the 3.0L inline-six engine, including the oil filter change. It's always a good practice to check the owner's manual for the specific requirements, as variations may exist based on the engine type or any modifications made to the vehicle.
How do you change the headlight on a 1990 Toyota Cressida?
To change the headlight on a 1990 Toyota Cressida, first, open the hood and locate the headlight assembly. Remove the retaining clips or screws securing the assembly, then gently pull the assembly forward to access the bulb. Disconnect the electrical connector from the bulb, remove the old bulb by turning it counterclockwise, and replace it with a new one, ensuring it’s secure. Finally, reassemble the headlight assembly and reconnect the electrical connector before closing the hood.
