Brake Pads and Rotors
Chevrolet
GMC Sierra

How do you change the front rotors on a 1996 GM Chevy Sierra?

252627

Top Answer
User Avatar
Wiki User
2011-09-13 00:21:36
2011-09-13 00:21:36
Changing Disc rotors on a 88 - 97 GMCIt is very simple. All you have to do is remove your tire. Then on the back side of your brake caliper there are two screws you will need a 3/8" Alan wrench or equivalent. After that you can simply pull the caliper off of the rotor and then slide the rotor off. If you do not want to bleed your brakes then you can simple take a 3" C-clamp and tighten the caliper back. This will allow you to put new brakes on your new rotor without bleeding the lines.
1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

How do you change the front rotors on a 2004 Chevy tracker

User Avatar

Remove the tire and wheel from your 1994 Chevy. Remove the brake assembly. Tap on the rotors with a hammer or mallet. The rotors will slide off. Reverse the process to install the new rotors.

User Avatar

A 1977 Chevy pickup truck would have rotors in front and drums in the rear

User Avatar

Change front brake rotors on a 1998 Hyundai Accent?

User Avatar

I worked on a 2003 today and it had both. It had rotors up front and drums in the rear.

User Avatar

First remove the right and left tires, and then proceed to remove the rotors. After you have replaced the rotors put them back on.

User Avatar

The brake rotors are warped. Machining or replacement of rotors necessary to correct that.

User Avatar

Remove the wheel, the calipers and the rotors, reverse procedure with new rotors.

User Avatar

Your rotors on the front are warped replace the rotors and break pads ane it will be fine

User Avatar

Need to know if this is a 2 wheel or 4 wheel drive S10.

User Avatar

They are behind the front rotors and you can't see them. But you can see were the electric wire goes in behind the rotors that hook to them.

User Avatar

2 wheel or 4 wheel drive, front or rear rotors, it makes a big difference.

User Avatar

Most likely needs the front rotors turned or replaced.

User Avatar

Tap on the rotors with a hammer, after removing the tire and wheel and the brake assembly. The rotors will come loose. Slide the rotors off and reverse the process.

User Avatar

how to change front shocks in 01 Chevy s10

User Avatar

The front rotors need to be pressed on, if you know someone with an industrial press you can do it yourself.

User Avatar

remove the brake caliper and the rotors come right off

User Avatar

if you are driving and you go to stop, then that means that the front rotors are warped. if the front rotors are bad, you will feel a pulsation in pedal while applying brakes. change rotors on front.

User Avatar

wear gloves, bearings all come out. then you have to remove the sensor off the back of it. along with 6 17mm bolts. How do you change the rotors in the front on a 1998 Isuzu Trooper

User Avatar

the rotors are front mounted brake (pads) and the rear are usually the spring type ..also known as(shoes)

User Avatar

take the wheels off, unbolt the brake calipers and the pull them off and now you can just pull the rotors off.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.