The process is in the owner's manual, but here's the quick version:
Under the hood there is a power cord going into the back of the headlight, wiggle that out. Then the rubber ring around the outlet comes off, pull the tabs at the top and bottom till it comes off. Inside there is a little wire rod that holds the bulb in place, press on it and then press up and it will swing open. The bulb can be removed then. DO NOT TOUCH THE NEW BULB WITH BARE SKIN AS IT CAN SHORT IT OUT. Put bulb grease on the prongs of the new headlight bulb and put it back in, put the wire in place, replace the rubber ring, and plug it back in!
How would you change the headlight bulb in a 1987 Honda goldwing? GL1200
To change the headlight on a 1985 Honda Spree scooter remove the headlight housing. The scooter headlight will be mounting on the rear of the housing. Remove it and replace the bulb.
9006 or 9007
Replacing a headlight bulb on a Honda Passport is very easy to do. The hood will need to be opened to change the bulb. The old bulb can be pulled off by using the connector and the new one put in. No tools are required.
Go to auto shop.
To change the headlight bulb on a Honda Ridgeline, first, open the hood and locate the headlight assembly. Remove the cover or dust cap from the back of the headlight housing, then disconnect the electrical connector from the bulb. Twist the old bulb counterclockwise to remove it, and insert the new bulb by twisting it clockwise into the socket. Finally, reconnect the electrical connector and replace the cover to complete the installation.
To change the headlight bulb on a Honda VTX, first, ensure the motorcycle is turned off and cool. Remove the headlight assembly by unscrewing the retaining screws or clips, then carefully disconnect the wiring harness. Pull out the old bulb and replace it with a new one, making sure not to touch the glass with your fingers. Reconnect the wiring harness, reattach the headlight assembly, and test the new bulb before riding.
how do you replace headlight bulb in a 2001 celica gts
Open Hood. Remove the cover from the headlight by prying up the keeper. Remove the metric 13 nuts holding the headlight in. Take out headlight and replace the bulb. Reinstall the headlight and reinstall headlight and cover.
make sure you fill up your headlight fluid after you change the bulb
To change the headlight on a 2001 Chevy Prizm, first, open the hood and locate the headlight assembly. Disconnect the electrical connector from the back of the headlight bulb, then twist and remove the bulb from the socket. Replace it with a new bulb, making sure not to touch the glass with your fingers, and reattach the electrical connector. Finally, test the new headlight to ensure it works properly before closing the hood.
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?