Open the hatch door. Right behind the license on the inside of the door is a cover that you take off using a thin blade. This exposes the back of the bulb holder and the wire connected to it. Remove the wire by pulling on the connector that fits into the back of the bulb holder. The back of the bulb holder then needs a quarter turn counter clockwise. The best tool to use to turn the bulb holder is a 15 mm socket on an extension long enough to reach the bulb holder inside the hatch. Once you have removed the bulb holder, you can simply pull the bulb straight out of the front of the bulb holder. Replace the bulb with a #168 bulb.
how do u change the license plate light on a 2005 sienna
The 2001 Toyota Camry license plate light fuse can be found in the fuse box. The license plate fuse will be labeled as the tail light fuse.
There are plastic bulb covers on either side of the license plate. Unscrew the screws and take the covers off. From there you can insert new bulbs.
how do you change a heater matrix on 1.2 corsa 52 plate
Changing a rear license plate light on a 1991 Toyota Corolla will be very easy to do. You need to take the license plate off and then unscrew all the plastic screws holding the light cover in place. After the screws are out, remove the cover and unscrew the old bulb and replace it with a new one.
open the trunk and take off the cover and just do it
How do you change the lamp on the license plate of a lincoln ls 2000?
how do you change the light bulb over the license plate on 2000 eclipse
No. The licence plate cannot be altered.
how do you change the rear license plate light on a 1999 Buick Regal
how to change 2005 equinox license plate light i removed the screws but it didn't release
How do I change the license plate bulb on a 1993 Lexus ES 300