Place a drip pan below the oil pan and oil filter. Remove the oil pan plug. Drain the oil into the oil pan. Replace the plug to the oil pan. Turn the oil filter to the left, to remove. Fill the oil filter with oil and replace it to its original position. Fill the motor with oil.
According to the 2006 Mercury Milan Owner Guide : For the 3.0 litre " Duratec " V6 engine : With engine oil filter change : ( 6.0 US. quarts / 5.7 litres of 5W-20 )
According to the ( 2006 ) Mercury Milan Owner Guide : With engine oil filter change : The 3.0 liter Duratec , V6 engine takes : ( 5.7 liters / 6.0 U.S. quarts of 5W-20 )
4.5 quarts ( 4.25 liters ) with engine oil filter change , according to the Owner Guide
4.5 quarts / 4.25 liters , with engine oil filter change ( according to the Owner Guide )
( 6.0 quarts ) with engine oil filter change , according to the Owner Guide
The Oil is drained by removing a plug in the oil pan, and letting it run into a pan. The filter is screwed to the side of the engine. After the oil is drained and the filter changed, add oil and check frequently to prevent overfilling.
On a 2007 Mercury Milan : The thread on cap on the engine coolant reservoir is the pressure cap / radiator cap
Bottom of the engine on the oil pan.
Mercury Milan was created in 2005.
The vehicle is equipped with a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed.
The Mercury Milan is not a place to stay. The Mercury Milan is a vehicle, and you can find more information on this vehicle by visiting their website at mercuryvehicles.com.
Just a socket wrench that will fit on the lid for the filter because it is a an actual filter cannister not the usual steel filter