In the trunk near the quarter panel there are several nuts that hold the rear header on. In the center is the nut that holds the tail light assembly on, it is in the middle of the tail light assembly. Take the nut off, then pull outward on the tail light until the stud comes out of the header, then pull out to the side to release a tab from the backup light fixture. Then take off the appropriate fixture and change the bulb.
To change a tail light on a 1988 Celebrity: Open the trunk. Look on the back of the side light you want to change. There will be several 10 mm nuts. Remove the nut in the center of the tail light lens. It is usually silver. The lens will then pull out a bit, then there is a tab into the backup light, pull the lens out of that. You can then remove the light socket and replace the bulb.
what is the wiring diagram for an 1988 Chevy celebrity stero
The fuel filter on a 1988 Chevy celebrity 2.5 litre FI is located right in front of the rear passenger side tire.
The fuel pump on your 1988 Chevy Celebrity is in the fuel tank.
The fuel filter in your 1988 Chevy Celebrity is on the driver's side behind the rear wheel next to the fuel tank.
The 1988 Chevy Celebrity uses distributorless ignition. There is no provision to alter timing, the engine control module takes care of that.
you need to drop the gas tank down and remove fuel pump from tank.
100 lb or above
In the fuel tank
No easily, however, I suppose you could.
The coolant fan relay on a 1988 Chevy Celebrity with 2.8L V6 is on the radiator support bracket behind the right hand headlights.
The PCV valve on a 1987 - 1990 Chevy Celebrity is in the top center of the valve cover nearest the firewall.