No special tools needed, Spark plug socket and ratchet wrench is all you need. Granted, the access is very tight and it is not possible to see the spark plug or the spark plug hole without a mirror and flash light. You should be able to do this by feel. Beware! Make absolutely sure that you thread the new spark plug in by hand because if you do it with the new plug in the socket and try to thread it in with the ratchet you will more than likely cross thread the plug in the engine. Be patient, it will work. I have had my 98 cutlass since new and have done all the maintenance myself. Hope this helps.
how u change spark plugs on 1998 gmc safari van
== ==
Changing spark plugs is an important task. To do this, disconnect the battery and spark plug cables, and remove the old spark plugs. Next put in the new spark plugs, and reconnect the spark plug cables and then the battery.
I changed the spark plugs on a 1998 Nissan maxima se with the instructions from the car manual. It tellsyou exactly how to change them and it has pictures.
There is a black cover on top of the cylinder head (the one with 20V written on it), the spark plugs are under it.
It has spark plugs. They are just hidden from view.
The spark plugs on a 1998 Mercedes Benz E320 are changed by removing the cover plate, disconnecting the plug wires, and unscrewing the spark plugs using a deep wall socket. New plugs are then put in place and torque down to specifications.
You have to jack the car up and chang them from underneth.
first you need to state what liter the engine is.
You have to jack the car up and chang them from underneth.
remove the coil packs on top the engine with a small tork bit then change plugs
That means its not the spark plugs........Oh ya check your gas gage...