Remove the rear speaker covers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new speakers.
rear speakers
You will have to take it to the agent to enable the rear CH.
Remove rear seat, them remove rear deck to get to the speakers.
Remove the cover from your 2001 Kia rear speakers. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new rear speakers.
Remove the cover in the rear window.
how do I remove rear speaker in rear door 94 astro van rear door will not open
To change the rear speakers on a Peugeot 307 CC, first, remove the rear side panels by carefully prying them off with a trim tool to access the speakers. Disconnect the wiring harness from the old speakers, then unscrew and remove them. Install the new speakers by reversing the process: connect the wiring, secure the speakers with screws, and reattach the side panels. Ensure everything is properly fitted before testing the new speakers.
To change the rear speakers in a Lincoln LS, first, remove the rear seat to access the speaker location. Then, detach the speaker covers or grilles, usually by prying them off carefully. Disconnect the old speakers by removing the screws and unplugging the wiring harness, and then install the new speakers by reversing the process. Finally, test the speakers to ensure they are working before reassembling the seat and covers.
don't get a Lexus
6"X9" speakers in the rear 6.5" speakers in the doors 3.5" spearkers in the dash
Disconnect the battery to prevent any electric shorts or shocks. Unscrew the speakers from their mounts and go through the trunk to remove the rear deck speakers. Replace the old speakers with the new speakers and screw them in. Connect the battery again and test your speakers.
To change the rear speakers on a 2003 Honda Civic, start by removing the rear speaker covers using a flathead screwdriver or a trim tool to gently pry them off. Next, unscrew the old speakers from their mounting brackets and disconnect the wiring harness. Install the new speakers by connecting the wiring and securing them with screws, then replace the speaker covers. Finally, test the new speakers to ensure they are working properly.