output shaft seal
It should just pop out with a screwdriver once the drive shaft is out, the new one presses in, use a hammer and a socket the same size as the metal part of the seal.
To change the rear main seal on a 2002 Chevrolet Suburban, start by disconnecting the battery and removing the transmission. This typically requires dropping the transmission and possibly the oil pan for better access. Once exposed, remove the old rear main seal using a seal puller and clean the sealing surface thoroughly. Install the new seal, ensuring it is seated properly, then reassemble the transmission and other components.
The 2002 Chevrolet Suburban has 39 in. of rear head room.
The 2002 Chevrolet Suburban has 65.1 in. of rear shoulder room.
The 2002 Chevrolet Suburban has 39.1 in. of rear leg room.
The 2002 Chevrolet Suburban has 61.6 in. of rear hip room.
The rear track of the 2002 Chevrolet Suburban is 5 ft. 6 in. (66 in.).
The 2002 Chevrolet Suburban has rear wheel drive.
The 2002 Chevy Suburban features speakers which are 6 and a half inches. This size applies to both front and rear speakers.
take out 6 bolts from the rear of transmission
if it's the crank seal you're talking about - yes.
It screws in from the rear. TAke the light assy off.
the starter on a 1997 Suburban is on the side of the engine. It is at the rear where the transmission meets the engine.