You open up the hatchback and take the carpet loose from behind the lens assembly. Take the nuts off the back of the lens assembly and pull the whole unit out towards the back of the car. Pull the bulb socket out of the assembly and replace the bulb. Reverse to put back.
You will need to remove the 1998 Chevy Camaro brake light wiring harness. Remove the brake light retaining screws. Reverse the process to install the new brake light.
unscrew the light from the car, it should pop out. Twist the light bulb out and then pop the light off from the base. Reverse to reassemble.
how to change reverse light in a 00 passat
Light comes on automatically when you put transmission in reverse, must be built in safety.
The 1996 Chevy Tahoe reverse wire is light blue. You can find the reverse wire inside of the steering column.
How do change a light on a steering column in a 2006 chevy truck?
light green
Disconnect negative from battery remove four clips from ashtray disconnect lighters and bulb reverse procedure for install
how to change brake light switch in a 2007 chevy colorado
Look on the back side of the bumper find the socket turn it, remove the bulb replace it, reverse steps to reinstall it
How do you change the fog light on a 2005 Chevy Equinox?
Pull off the head light bezel,4 screws,then the head light ring also 4 screws.pull out bulb unplug and then reverse operation