first you need to state what liter the engine is.
remove the coil packs on top the engine with a small tork bit then change plugs
how u change spark plugs on 1998 gmc safari van
HTE SPARK PLUGS ARE IN THE TOP OF THE ENGINE JUST IN THE MIDDLE
change the spark plugs
It depends on what engine you have. On some you have to remove the housing on the top of the engine which contains the coils etc.
you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out
Changing spark plugs is an important task. To do this, disconnect the battery and spark plug cables, and remove the old spark plugs. Next put in the new spark plugs, and reconnect the spark plug cables and then the battery.
They are screwed into the engine at the ends of the spark plug wires.
In the cylinder head, on top of the engine block.
Below the Ignition coils on top of the engine.
I changed the spark plugs on a 1998 Nissan maxima se with the instructions from the car manual. It tellsyou exactly how to change them and it has pictures.
Unfortunately, this is not easy. You have to basically take everything off of the top of the engine, all the way down to the fuel rail, to be able to access the rear spark plugs.
Disconnect the battery, remove the spark plug cables, and spark plug boots. Remove the old spark plugs and replace with the new spark plugs. Replace the spark plug cables and connect the battery.
There is a black cover on top of the cylinder head (the one with 20V written on it), the spark plugs are under it.
It has spark plugs. They are just hidden from view.
I have a 1998 Ford F-150 with 4 Wheel drive and want to change spark plugs.I would like to know the proper procedure.
to change the spark plugs...they have a special tool you by and you pull the wires off then you stick the tool down inside and you unscrew them and the install the others! on this vehicle you have to remove the coil pack on the back of the engine to get to the rear plugs to do this take the four bolts off the coil pack and simply move it out of the way to access the plugs
check were the headers are or they will be under the spark plug cover on the engine cover one of these spots
on top of the engine there is a cover sheild. remove the cover by the four bolt. the plug boots will come with it, the spark plugs are down in the holes.
The spark plugs on a 1998 Mercedes Benz E320 are changed by removing the cover plate, disconnecting the plug wires, and unscrewing the spark plugs using a deep wall socket. New plugs are then put in place and torque down to specifications.
the answer is elsewhere on this site. it appears that 3 of the plugs are on the back of the engine and you have to jack up the car to get to them....
Underneath the plastic cover that has MIVEC written on it.
You have to jack the car up and chang them from underneth.