how do you change the upper and lower ball joint on a 95 s10 pick up truck 4 cylinder rear wheel drive
u can't just change the upper ball joint, u have to change the whole upper control arm. It is welded to the arm in one piece.
A 2004 Chrysler Town and Country does not have an upper ball joint.
It's not always necessary to change the lower ball joint when replacing the upper ball joint. However, it's recommended to inspect the lower ball joint for any signs of wear or damage while working on the upper ball joint. If the lower ball joint shows signs of wear, it may be a good idea to replace it to ensure optimal performance and safety.
You have to change the upper control arm.
It's in the housing connected to your upper radiator hose.
if it is original the upper ball joint is riveted in, it will need to be chisel out,there are four rivets and then the nut that holds it to the control arm.new ball joint will come with bolts and nuts
what i know you can't take that ball joint to upper control arm but if you buy the upper control arm the ball joint comes with it.
To change the upper ball joint in a 1995 Lincoln Mark VIII, first, safely lift and support the vehicle on jack stands. Remove the wheel and tire, then detach the brake caliper and rotor to access the upper control arm. Unscrew the upper ball joint from the control arm and the steering knuckle, replace it with the new joint, and reassemble all components in reverse order. Always ensure to torque all fasteners to manufacturer specifications and have the alignment checked afterward.
The upper arm is the humerus, the lower arm is made up of the radius and ulna. The joint connecting the upper is called the humeroulnar joint.
with a screwdriver and a pair of pliers
I think you met joints, and the joints are the upper joint and the lower joint. The order of clarinet peices from the top is mouthpiece, barrel, upper joint, lower joint, bell.
how do i change a lower ball joint on a 1992 ranger 2wd