anarack
no
Not directly onto powder coat. But it will work if you prime the powder coat.
If the base coat used in your project is water base then yes, you bet you can. If there is any chance that the base coat used was an oil base paint then you cannot paint directly over it. The acrylic enamel will not adhere to the oil base paint and will begin to peel off as soon as it is dry. In which case a coat of primer is in order.
If the paint you are going to coat is completely dried / and cured, and are of the same "sheen" exp. semi-gloss, you should have no problem with the finished job.
It is very easy to coat enamel paints with acrylic paints but you really should pay attention to a couple of points if you want it to be successful. Always sand the the enamal well and fill any holes with lindeed putty then apply a good coat of undercoat. I use an oil based undercoat first and then several days later sand the undercoat lightly and coat with acrylic all purpose undercoat. Once you have done this you can apply acrylic top coats. If you are using a self priming type acrylic paint on external work, you could skip the acrylic undercoat and apply it straight on to the oil based undercoat but you must leave it for several days to dry completely before coating with acrylic. I have used both methods over the past 5 years and both have not shown any sign of problems to date.
You can use acrylic paint on plastic provided you prepare the surface first. Before you begin painting you will have to prime it with paint that is suitable for plastic, such as an enamel paint. Once you have finished painting with the acrylic paint, the project will need a top coat.
To apply acrylic nails you need... several nail files and buffers a cuticle pusher nail clippers a tip cutter nail tips and tip glue acrylic powder - at least a pink, and probably also colored acrylic for the tips (this has a shelf life) acrylic monomer (this has a shelf life) a brush primer (this ALSO has a shelf life!) top coat. If you use gel top coat you need a lamp to cure it. To fill them you also need acrylic nail nippers IME it would cost you more to set up for doing your own acrylics than it does just to go get them done.
Acrylic or epoxy based paint for cement surfaces is called cement paint.Cement that includes acrylic or epoxy to coat surfaces is called cement based paint.
future floor polish or krylon spray gloss coat
Strip heater-to heat up the acrylic so that you can bend straight line edges into it Acrylic drill bits-so that it is easier to drill through the acrylic Square- to check that everything is lined up correctly and is straight Solvent cement-is used to join pieces of acrylic together
NexTag has a list of merchants with reviews. Check it out: http://www.nextag.com/acrylic-coffee-tables/stores-html