In the fuse box.
dodge 2001 Dakota brake lights won't burn Check the fuses. If the fuses are okay check the brake light switch.
I have a '92 Dynasty and the turn signals quit working. The manual said that this happens because of a burnt-out bulb somewhere. Did you check those?
check your distributor cap and rotor, check the coil, check the wires, check fuses for ignition.
First check the bulbs then check the fuses.
check your cables, fuses and your float
Check the fuses and if they are good then check the brake light switch.
If you have a water leak, you need the check the drain tube at each corner. If it will not move, check the fuses.
no. check fuses and relays.
What is the vehicle? late 90's dodge? 97 Dakota, Check fuses
Check fuses and bulbs first.
There is no individual fuse. The ECM has 2 or 3 fuses, and it controls the check engine light.There is no individual fuse. The ECM has 2 or 3 fuses, and it controls the check engine light.
check your fuses.
Check relay, fuses then control head.
Check fuses and the headlight switch.
All fuses are in the under hood fuse box. The PCM will have at least two fuses feeding it. You will need to check them all.All fuses are in the under hood fuse box. The PCM will have at least two fuses feeding it. You will need to check them all.
check fuses, check brake light switch behind brake pedal.
Check all fuses and check for burn out headlights, high and low beams
First ,check and or change fuses, Don't exceed fuse number.
Check the fuses. Sometimes you have to remove and reinstall them.
check your fuse box for blown fuses
I would check switch. My 92 would only come on when working the knob. I went to the junck yord and pulled one. Now it`s ok.