0
What else can I help you with?
What is the transmission fluid capacity for a 1988 Acura Legend?
It is important to use the correct amount of fluid in a car. The 1988 Acura Legend takes about 3.2 quarts of transmission fluid.
Where do you put the transmission fluid in a 1990 Acura Legend?
Same place you check it if it is an A/T. If it is a manual there is a plug located near the top of the transmission.
How do you add transmission fluid to a 93 Acura Legend coupe?
On my '94, I went through dipstick. Make sure you get the HONDA/ACURA fluid from the dealer.
How do you add transmission fluid to a 98 Acura CL?
how do you add transmission fluid on 98 acura cl 3.0
Why hesitate shifts 1989 Acura Legend?
It could be a number of things going wrong. Try dropping the transmission pan and changing the transmission oil filter and transmission fluid.
How do you check transmission fluid on acura 3.2 tl?
To change transmission fluid on a Acura 3.2 TL you must first check the existing fluid level when the transmission is hot which takes 15 to 20 minutes of driving. Next you will need to dip the dipstick in the transmission fluid to check the level which should be between the third and second level of the dipstick. Use a funnel to add transmission fluid if necessary. Next start the engine and shift into each position and then apply the parking break and turn the engine off. Recheck the transmission fluid and add more if necessary.
Where do you add transmission oil on a 1988 Acura Legend 5 speed?
There is a plug on the side of the transmission and you will need a funal with a long hose. Do not put transmission fluid in the trans. I believe that they use 30 weight oil for these cars. Be sure to check with your local auto parts store.
How do you add transmission fluid to 1994 Acura Legend?
if it is a automatic through the dip stick hose.if it is a standard through a nut on the side of the tranny.
Where is the transmission fluid dipstick for a 2002 Acura RSX?
The transmission fluid dipstick for a 2002 Acura RSX is located near the back of the engine bay, on the passenger side. It is typically a yellow or orange handle, making it easier to identify. To check the fluid level, ensure the engine is warm and running, then pull out the dipstick, wipe it clean, reinsert it, and check the fluid level.
What type of transmission fluid is required for a 97 Acura CL?
Any type of SAE certified transmission fluid can be used in the 1997 Acura. The transmission should never be overfilled.
Your integra automatic transmission shifts rough .what can it be?
Check your transmission fluid level. If it is low add just enough Acura A/T fluid ATF DW-1 to reach the full mark. Warning: Do not overfill and use only genuine Acura ATF DW1 fluid and nothing else. Check it according to the owners manual instructions. If it is full then you need to seek professional help and have the fluid filter changed. Insist they use only Acura Fluid and no substitute which they may try to use or your transmission will not sift properly.
Location of bleeder valve on 94 Acura Legend?
what fluid??
