answersLogoWhite

0

There is a fill hole in the side of the transmission towards the middle facing inward. The fluid should be just high enough to not run out of the hole.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

Will a automatic transmission out of a 93 Acura Integra work in a 91 integra?

Yes it should. Im 99% sure it will. you might want to double check the part number to see for sure. i have a 1990 Acura integra and i have used many parts from integras from 1990- 1993.


How to check a distributor on 94 Acura Integra?

no spark


Where is the dipstick located to check transmission fluid on the 1998 acura integra?

if its a manual transmission you dont have one it has a plug you unscrew and look into if its an automatic its on the passenger side(the side with the transmission) it will have a yellow handle on it.


What type of transmission oil uses a 97 Acura Integra?

The 1997 Acura Integra typically uses Honda Manual Transmission Fluid (MTF) or an equivalent 10W-30 motor oil for its manual transmission. If the vehicle has an automatic transmission, it requires Honda ATF-Z1 or an equivalent automatic transmission fluid. Always check the owner's manual for specific recommendations to ensure optimal performance.


Your 1990 Acura Integra will not start?

Check your negative cable to the battery.


Your Acura Integra stalls out and has no power?

Check to see if there is gas in the tank.


How can you find out what type radiator is in your 1988 Acura Integra?

check out www.honda-tech.com


What causes the power windows on my 1993 acura integra not work?

Check the fuse


What is the oil capacity for a 1997 Acura Integra?

The 1997 Acura Integra takes from 4.2 to 4.4 quarts of oil depending on the engine. Check the dipstick to make sure the oil is not overfilled.


1990 acura integra tail light does not work fuse is okay?

check the bulbs


How do you find a wiring guide for a 1990 Acura Integra?

check the Chiltons guide, $20.


Why does your 90 Acura Integra idle rough?

Check idle adjustment (rpm) then check timing, then check for misfire-start there.