Take two electrolytic capacitors of the same voltage and capacity, connect the positive leads together and connect the negative leads to the circuit. Just keep in mind that this will reduce the cap. value by half (2, 1000uF caps = 500uF) Also the voltage of the circuit should not exceed the voltage of one of the caps.
electrolytic
if exact replacement capacitors are not available,you should substitute it with a capacitor that has
Alluminium
A polarized capacitor will be permanently damaged if connected to the incorrect polarity.
tantalum,mica,paper,cermic
electrolytic
ab
if exact replacement capacitors are not available,you should substitute it with a capacitor that has
Only electrolytic capacitors (tantalum capacitors are a type of electrolytic capacitor) are polarized.0.001 farad = 1000 microfaradThis is a value that is too large for any practical capacitor except an electrolytic, so yes it will be polarized.
The electrolytic capacitor can only have voltage across it in one direction. Failure to comply will result in catastrophic destruction of the capacitor.
Alluminium
electrolytic
electrolytic capactior
Electrolytic capacitors are capacitors in which one or both of the plates is a non-metallic conductive surface, or in other words, an electrolyte. Electrolytic capacitors come in a variety of types including: aluminum electrolytic capacitor; tantalum; and a solid aluminum electrolytic capacitor with organic semiconductor electrolyte or OS-CON.
An electrolytic capacitor uses an electrolyte (ions in a solution) to store charges.
electrolytic
Electrolytic capacitors look like little batteries. Any capacitor that looks like this will be electrolytic.Another AnswerElectrolytic capacitors are polarised, so their terminals are marked with positive and negative symbols.