To get a square measurement of a width and length you multiply them together.
for example (width) 3ft x (length) 4ft = 12 square ft
It works the same with any unit of measurement
there would be 2 variables:
say the sq ft was 30
30=LxW
so the l and w could be
6 & 5
10 & 3
15 & 2
30 & 1
see hows theres not just one answer?
area = length * width so...300 square feet 300 = 1 * ? your answer is 300.
A square foot cannot be expressed in length alone but must be expressed in area. That is a square foot is a square of which both the length and width equal one foot or 0.3048 meters.
Square foot of area = length (in feet) * width (in feet)
length x width = area (sq. foot)
144 square inches in a square foot. The simple formula is multiply length time width (12 x 12 = 144). If you have the square foot measurement of the area you hope to convert, multiply that by 12. That being said, as the question is asked, inches (linear inches) cannot be converted to square feet.
Length times width
The area of a square or rectangle is the product of its length and width. The area of a square having sides 2 foot in length is 4 square feet.
Multiply the length times the width.
Convert the feet to meters (one foot = 0.3048 meters). Then multiply length x width.
There is no way to convert between feet (length) and square feet (area). A square foot is a measure of area while feet are a measure of distance. The two measure different things. To get square footage, you have to have a length in feet and a width in feet.
Commonly, a square having length and width of 1 ft is known as a square foot.
A length of 17 feet cannot be converted to square feet. A square foot is a unit of measure of area, while a foot is a measure of length. The two are dissimilar. It is not possible to convert between them.
A square foot cannot be expressed in length alone but must be expressed in area. That is a square foot is a square of which both the length and width equal one foot or 0.3048 meters.
area = length * width so...300 square feet 300 = 1 * ? your answer is 300.
length x width = area (sq. foot)
Square foot of area = length (in feet) * width (in feet)
This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area. Generally, volume is determined by multiplying length x width x depth. Area is normally determined by multiplying length x width.