answersLogoWhite

0


Best Answer

Well, It's a pretty simple process if you can get the damned thing open. -If you have a wired controller, use a small Phillips head screwdriver to take out all the screws and open the casing. -If you have a wireless controller, you'll need a T8H security Torx screwdriver. You can buy these on Ebay and Amazon, but you'll never find one at SEARS (I've looked, trust me). OR, you can make like I did and snap off the pin in the middle of the screw with a very small flathead screwdriver or a pocketknife. They're pretty easy to bend, and if you bend them twice, they'll pop right off. You van then take out the screws with a regular T8 Torx screwdriver. These, you CAN get at SEARS. Once you have it open, look just below the circuit board. There should be two silver and black cylinders with half- circle weights attacked to them. These are the vibro- motors. They connect to the circuit board through a pair of cables- they even have plugs and sockets. Simple unplug the motors. Or, if you want to save some weight, take them out completely. Close the sucker up and you're good.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you disable vibration in Xbox controller s?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you open an Xbox S controller?

it is simple. take out the screws on the back.


Can you change a xbox 360 wheel from a skip dr for a ps3 wheel?

No. An Xbox 360 wheel controller is different to PS3's wheel controller. Therefore, it will not work.


Is there an adapter for the wired Xbox controller s for use with the Xbox 360?

I'm not sure. However, I'm pretty sure you're able to wire a USB end onto the original xbox controller for use on PC. This should work for the xbox 360 too since it uses USB controller slots. Google the xbox to PC controller to see how to put a USB end on.


Do Xbox 360 headsets work on Xbox 360 s?

Yes you just need to plug them into your controller and you need xbox live :D


Can old Xbox controllers be used on Xbox360?

Yes, but you need to buy this thing that plugs the end of your old xbox controller into it and then the end you plug into the xbox 360. Xbox and Xbox 360's have a different plugy thingy on the end.


Is Xbox 360 elite controller compatiable with Xbox 360 s?

Yes the only difference between the controllers is the colour and the controllers will work vise-versa


Where could one find a used Xbox controller S?

A used Xbox controller S can be found online at various sites and stores such as amazon, gamestop and Ebay. You can always try to post on a gaming forum. There are often people on those forums willing to sell their old controllers.


Can you use an xbox s controller in a xbox360?

No you must have an Xbox360 controller. There are both wireless and wired ones. I would reccommend getting a "Play and Charge Kit" if you get wireless.


Can Xbox 360 play DVD's?

Actually yeah it can except unlike the regular xbox it doesn't have a remote you press something on the controller and look and the stuff you can do


Why does your xbox 360 controller disconnecting?

If it's a wireless controller, check the batteries, try new batteries. Or maybe the controller is not set to your xbox 360, press the little round button near the memory card slots, and then press the really small button on the top of the wireless cotroller. If you mean the old xbox or non-wireless cotrollers then I don't know


Is the Xbox controller the same as the Xbox 360's?

No, on the 360 controler there is no White and Black buttons, they are replaced by two bumper buttons just above the triggers, much like the PS2 controler.


What does L and R stand for in xbox controller s?

Left and Right................idk what else it would stand for. left trigger and right trigger