How do you rubik cube?

Answer 1

The basic steps:

1.) Get the green edge pieces in place

2.) Get the green corners in place

3.) Get the second layer solved

4.) Get the blue edges flipped the right way

5.) Put the blue edges in the right places

6.) Get the blue corners in the right places

7.) Rotate the blue corners the right way

The notation for the algorithms:

(This depends on what side is facing you.)

F-------turn the front side clockwise

L-------turn the left side clockwise

R-------turn the right side clockwise

U-------turn the "up" side clockwise

D-------turn the "Down" side clockwise

Fi------turn the front side counterclockwise

Li------turn the left side counterclockwise

Ui------turn the "Up" side counterclockwise

Di------turn the "Down" side counterclockwise

Step #1

1.) look on the blue side for an edge piece that has green on it

2.) rotate the blue side until that piece is directly under where it needs to be on the green side

3.) flip it up so it is in the right position

4.) repeat until the green "cross" is solved

NOTE: If a piece is flipped the wrong way, hold the cube so the green side is on the top and the flipped edge piece is in the front side. Do the algorithm: Fi,U,Li,Ui To flip it the right way.

Step#2

1.) same as before, look on the blue side for a green corner piece

2.) rotate the blue side so the green corner is directly under where it needs to be

3.) Hold the cube so the green side is the up side and the corner is in the bottom-right corner of the front side.

4.) Do the algorithm: Ri,Di,R,D either once, three times, or five times to get it in the right place

Step#3

1.) flip the cube so the green side is down

2.) look on the blue side for an edge piece that doesn't have blue in it

3.) rotate the blue side so the color on the edge piece that isn't on the blue side lines up with It's other color; making a straight line

4.) if the piece needs to go to the left, do this algorithm: Ui,Li,U,L,U,F,Ui,Fi and if it needs to go to the right, do:U,R,Ui,Ri,Ui,Fi,U,F do that until the middle layer is solved

Step#4

1.) Next, on the blue side (not including the corners) you should either have a: DOT, "L", LINE, or "CROSS" you need to get the cross

2.) Hold the cube so, if you have the L, have it face the upper right, if you have the line, make it vertical, and the dot hold it in any was so it is at the up face.

3.) Continue doing the algorithm: L,F,U,Fi,Ui,Li until you get The cross

Step#5

1.) Rotate the blue side until two of the blue edges are in the correct places and hold the cube so they are in the top-right of the up side.

2.) Do the algorithm: R,U,Ri,U,R,U,U,Ri,U to solve it

NOTE: The two that might line up are opposite eachother, so do the algorithm when they are vertical on the up side

Step#6

1.) Look at the rest of the corners that are unsolved and if any are in the right position, but flipped the wrong or right way, hold them in the bottom-right of the up face.

2.) Do the algorithm: U,R,Ui,Li,U,Ri,Ui,L either once or twice

NOTE: If there aren't any in the right position, but flipped the wrong or right way, do this from any side

Step#7

1.) With all the cube solved except for the either two, three, or four corners in the right places, but flipped the wrong way, hold the cube so one unsolved corner is in the bottom-right hand corner of the up face(wich is blue)

2.) Do the algorithm: Ri,Di,R,D until that corner is solved.

3.) Rotate JUST the upside so another unsolved corner is in the same position as the previous corner and do Ri,Di,R,Duntil that one is solved and (if needed) rotate the up face so another unsolved corner is in the same position as the previous corner.

4.) repeat steps 2-3 until all the corners are rotated the right way.

5.) You can figure it out from here (-:

Answer 2

I added a Rubik's Cube solution Guide in the link section.

This is a very good Rubik's cube solving guide with animations for beginners!

Good Luck!