The easiest way is to stick a pump hose down the filler neck, and pump the fuel out. If you are draining it to drop the tank, for sending unit reasons, ect. you might just consider taking of the bed. That will give you full access to the top of the tank.
The oil drain plug on the 2000 Ford Ranger is on the rear of the oil pan. It is located under the vehicle near the center.
lorftion drain plags 3.0 l Ford
underneath the engine
On the oil pan, bottom of engine.
can you use a transmission from a 1993 ford ranger in a 2000 ford ranger?
The 2000 Ford Ranger was equipped with two different 3.0L 6-cylinder options between codes 'U' and 'V' (Flex-Fuel). Both engines have a coolant service fill of 14.8 quarts.
torque spec on the oil drain plug on a 2.9 ford ranger?
For a 2000 Ford Ranger : All the different engines came from the factory with a 50 / 50 mix of distilled water and GREEN colored antifreeze ( meeting Ford specification ESE-M97B44-A ) * 2.5 / 3.0 FFV / 4.0
where are the fuseible links located on a 2000 ford ranger
Should be on the Filter Accumulator or somewhere in the line close to it.
bolt pattern for 2000 ford ranger & ft pounds
According to www . motorcraft . com ( no spaces ) For the 2000 Ford Ranger with the 3.0 L flex fuel engine Motorcraft part numbers for ( fuel pump and hanger with sender ) PFS 121 - with 112 inch wheelbase PFS 122 - with 118 inch wheelbase PFS 123 - with 126 inch wheelbase