Want this question answered?
Fill the cylinder with water to a marked point. Then place the rock in the water and measure how much the water level rises. That will give you the amount of volume displaced by the rock and so the volume of the rock.
There is no formula for measuring the volume of irregular shapes. The mass can be measured by using a weighing scale.
The diameter, alone, is not enough to find the volume of a cylinder. You need the height as well. > Where pi = 3.1416, and d = cylinder diameter cylinder volume = pi * (d/2)2 * length of cylinder
To determine the volume of an irregular object using graduated cylinders, you fill a graduated cylinder with water right to the top, then submerge the object in the water. Measure the water that overflows using a second graduated cylinder, and read the water level in it in cc's or cubic inches. That is the object's volume.
cause it is way more simple and it takes way less time
The volume of the stone is measured by displacement. Water is put into the measuring cylinder to a noted mark. The stone is placed in the cylinder and the water level will rise. The difference between the two levels is the volume in ml of the stone.
Using a 10 ML graduated cylinder you can read 2 decimal places. This is also measuring volume.
Volume of liquids. You could also use it to measure the volume of small solids using the displacement-of-fluid method.
Because liquid and solid are two different things
using measuring cylinder (if the volume is large) using syringe / needle (if the volume to measure is very small, below 2 ml)
Mass divided by volume. Weigh the pellets to find the mass, then add the pellets to a measuring cylinder of water (or something of higher density than your pellets) and find the volume using the rise of water in the measuring cylinder
It depends on the experiment. In one particular experiment, using the technique of measuring volume as a means of counting will work. Think of measuring volume; a tablespoon of sugar or salt. When measuring the volume of it, we are measuring how much space it takes up. This can also be a means of counting because once the molar mass of each element is accounted for, the number of moles (counting!) can be calculated.
measuring cylinder
A burette is preferred for titration over a measured cylinder because it can give a finer volume reading. You can also add in all your chemicals at the start of the experiment.
Well, that depends on what cylinder you are using. For example, a graduated cylinder is used to measure the volume of a liquid, the measure of a solid by displacement, or for measuring quantities of volumes to be added into a mixture or chemical reaction.
The water displaced by the stone is directly proportional to its volume
A measuring cylinder is used to measure the volume of liquids. A measuring cylinder is used for measuring solutions, liquids and also water. For example, a solution made up of salt and water could be measured.