the rover 75 comes with the ftg unit inside the glove box. just unscrew the panel below (2 screws) and you will find the connector that plugs straight in and then feed it into the glove box (which is were your CD multi will be housed) when you get it.
its bake in the TRUNK, there is a CD Changer
To connect a Rover 75 Harmony stereo to an Alpine CD changer, you'll need to identify the specific wiring harness and adapter compatible with both systems. Typically, the Rover's connector will not directly fit the Alpine changer, so you may need a custom adapter or wiring harness that matches both units. It's also advisable to consult wiring diagrams for both the stereo and CD changer to ensure proper connections, especially for power and data signals. Finally, check forums or automotive audio specialists for specific guidance from others who have made similar connections.
no
take CD changer out of glove box take the cover of CD and look inside to the right hand side you will see a large black plastic wheel turn it slowly and you will see the CD drawer go back into the magazine then press magazine release button job done
just underneath the drivers seat
A 2005 Mustang should fit any CD changer you want, but may require some equipment to make it fit properly.
The CD changer is under the passenger seat. There should be a cover at the bottom of the front side of the seat. Open that and you should see the changer.
you will need to fit a CD changer
Pioneer CDX P680 CD changer is a good simple car CD changer.
The CD changer is in the trunk.
Remove the retaining cover from the front of the CD changer. Remove the CD changer retaining screws. Remove the wiring harness from the back of the CD changer.
It is located in the load space inside the left side panel of the vehicle.