How do you fix a neutral safety switch on a 2000 jeep wrangler?

Answer 1

On the passengers side of the trans about even with the front of the door fan shaped switch held on by two bolts.

I suggest taking it apart and cleaning it before you think about replacing.

The switch is nearly $300

To remove, flatten out the retaining washer side under nut, remove large nut, remove smaller ( 14mm ) bolt on the adjustment side. Connector for the wires is top left of engine at the firewall, black connector with about 8 wires, you will need to snip 3 or so zip ties to get it free.

cleaning is easy, 6 screws in back, pull apart, clean out all that old grease, pay special attention to the two contacts on the sweeper arm, they should move in and out easily as they have springs underneath and are the man contacts, apply new di-electric grease and reassemble.

reassemble and align before tightening, easiest way is to put trans selector in R and move switch until reverse lights come on.