change wiper switch
Dodge doesn't use an inertia switch. It controls the fuel pump via a pcm actuated relay.
On a 1993 Dodge Dynasty, the dimmer switch is typically located on the dashboard, near the headlight switch. It may be a knob or a sliding control that allows you to adjust the brightness of the instrument panel lights. If you're having trouble locating it, check the owner’s manual for specific details.
The fan sending unit is on the side near the thermostat housing.
There is no fuel pump inertia reset switch on any Chrysler vehicles.
To remove the wiper arm on a 1993 Dodge Dynasty, first, lift the wiper arm away from the windshield to access the base. Use a small socket or wrench to remove the nut securing the wiper arm to the pivot shaft. Once the nut is removed, gently wiggle the wiper arm back and forth while pulling it upwards to detach it from the shaft. Be cautious not to damage the windshield during this process.
Dodge did not make a 1996 Dynasty. The last Dynasty was built in 1993.
Under the hood, beneath the driver side wiper.
No.
There is no inertia switch on a Dodge.
this kind
The 1987-1993 Dodge Caravan/Grand Caravan takes 18" replacement windshield wiper blades on both sides front. 1987-1990 takes a 16" rear wiper and 1991-1993 takes an 18" rear wiper.
Underneith the Dash.