Cars & Vehicles
American Cars

How do you fix code po140 on a 97 blazer?


Top Answer
User Avatar
Wiki User
2011-06-13 00:52:00
2011-06-13 00:52:00

O2 sensor circuit bank 1 sensor 2 no activity. Check the wiring and connections to bank 1 sensor 2 O2 sensor, if all looks good replace the sensor.

User Avatar

Related Questions

iat sensor on a 97 blazer and what does it do

Probable causeFlasherFusecontrol lever

The "Check engine" light will illuminate and a code will set.

Trouble code P0446 means:Evaporative emission control system vent control circuit malfunction

Code p0507 2001 chevy s10 replace upper intake, iac, tps still have problem

Trouble code P0171 means: System Too Lean (Bank 1)

need to adjust head lamp on 97 s/10 blazer

How do you wire a Pigtail for a Fuel Pump on a 97 Chevy Blazer Thank You EVa

a 4 door 97 blazer front how do i do it

No. The Mustang is 5x4.5 The Blazer is 5x4.75

Trouble code P0144 means:O2 sensor circuit high voltage(Bank 1 Sensor 3)

Google '97 escort P0112' and take your choice.

I just changed one in a 97 blazer Their well known to go out the diafram leaks advance auto sells them $100.

Trouble code P0443 means: EVAP Canister Purge Volume Control Solenoid Valve

It is the engine speed curcuit that is malfunctioning. Replace the Crankshaft position sensor.

Trouble code P1506 means: Idle Air Control Overspeed Error

Just a suggestion, check your trailer lights harness for corrosion. They were taking the dash lights down in my chevy.

Where is the location of fuel pump relay on 1996 Chevy Blazer?

The 95 and 97 should be the same, and my 97 holds 18 gallons.

A fair number of parts will be compatible. Some will not be - for example, if you want to put a 98+ front end on a 94 - 97 Blazer, you'll need the core support from a 98+ Blazer, Jimmy, Bravada, S10, or S15. If you have sealed beam headlights (most commonly seen on 2WD 94 - 97 models), you'll need the wiring harnesses for the lights, as well.

To tell you to read the diagnostic codes.

Code P1441 means Vacuum cut bypass valve or circuit fault replace the bypass and it should go away

Change your transmission filter and have the trans flushed.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.