erase all codes and don`t fiil up with the engine running and don`t leave your gas cap loose
There many sensors in that vehicle, crank sensor, cam sensor, engine temp sensor, oil pressure sensor, oxygen sensors, fuel level sensor, fuel tank evap pressure sensor, mass air flow sensor, manifold absolute pressure senser and the list goes on. Need to know which sensor you are looking for.
Manifold Absolute pressure measures the change in manifold pressures. It is an input or data gathering sensor that the computer uses for management.
P0193 Fuel Rail Pressure Sensor Circuit High Input
Trouble code P0452 means: Evaporative Emission System Pressure Sensor/Switch Low Input Trouble code P0453 means: Evaporative Emission System Pressure Sensor/Switch High Input
The manifold absolute pressure (MAPO) sensor monitors the air pressure as an important input to the vehicle's EFI system. On this application the MAP is bolted to the intake manifold, from where it gets its pressure readings.
Trouble code P0935 means: Hydraulic pressure sensor circuit high input
It is a sensor on the transmission that reads the rotational speed of the input shaft.It is a sensor on the transmission that reads the rotational speed of the input shaft.
P0452 indicates that the Fuel Tank Pressure(FTP) sensor circuit has low input voltage on that circuit. Possible causes: Fuel tank pressure (FTP) sensor completely submerged in liquid fuel. Inside contamination of the electrical connector on the FTP sensor. FTP short to SIG RTN or PWR GND. Damaged FTP sensor. Damaged PCM.
It does not use an input speed sensor.
There isn't an input speed sensor.
If an input output sensor has gone out, it will affect the functionality of your speedometer. If only the input sensor is affected, the speedometer will work with limited functionality. The output sensor will cease the speedometer from working completely.
Where is my veh.speed sensor input location