0
Canon's A-series cameras were (and are) prone to developing a noisy squeal when the shutter is fired. The problem occurs when the lubrication on the mechanism dries out over time. The fix is to relubricate the offending parts. While there are instructions (available online; do a search) for doing this yourself, you can create worse problems if you get oil or grease where it doesn't belong. I've had cameras with the problem, but I chose to have a professional CLA (clean, lube, adjust) done to the camera.
I have an ae-1, The shutter speed is the dial on the top right side with all the numbers and the word "program" on it. Program is idiot-mode: used just to snap shots. In bright daylight use higher speed like 1000 or 1600 and in darker situations use like like 100. anything under 60 requires a tripod, for a clear picture. The speed can be so slow, that camera will allow you to set the speed slow enough that it could take a full minute to take a picture.
What else can I help you with?
Cost to fix a digital camera?
It depends on the type of problem you're trying to fix. Some parts cost more than others. In some cases it won't make sense to fix but rather to get a new camera.
Built in camera Sony VAIO?
How do you fix your camera,when it doesnt work. Shows black on skype or basic functioining/
How do you fix a camera with a stuck button?
In my experince: you can't. If it's not a expensive camera try getting a new one at e__y. If it is a very expensive camera find a repairman. Good luck
How do you fix a tiny dent on your camera?
well you should buy special tools such as camera repair kits so I have that problem too thinking of getting help from a friend
What is the process of getting an image onto paper using a film camera?
Make the exposure. Develop and fix the negative. Expose the printing paper. Develop, fix and dry the print.
Why is my Canon AE-1 shutter stuck and how can I fix it?
Your Canon AE-1 shutter may be stuck due to a mechanical issue or a problem with the camera's internal components. To fix it, you can try gently tapping the camera, changing the batteries, or seeking professional repair services from a camera technician.
How can I fix the lens error on my Canon S100 camera?
To fix the lens error on your Canon S100 camera, try gently tapping the camera on a flat surface, turning it off and on, or resetting the camera to its factory settings. If these steps do not work, consider contacting Canon customer support for further assistance.
How can I fix the lens error on my Canon PowerShot camera?
To fix a lens error on your Canon PowerShot camera, try gently tapping the camera on a flat surface, turning it off and on again, or resetting the camera to its factory settings. If these steps do not work, consider contacting Canon customer support for further assistance.
Canon powershot sd 1400 always gives the message equals a camera error was detected will shut down automatically restart camera e32 how do you fix that?
my canon power shot sd 1400is always says error E32 ? How do i fix this ? its a new camera
Your canon s21s power shot digital camera will not show anything on the display execpt a squar box and will not take pictures does anyone have a sugestion?
This is a huge problem with the S21s by Canon. IT doesn't do any good to call Canon. They tell you to reset the camera back to default, as if we didn't do that already. Then they will tell you to send the camera in to their service dept. They will contact you on what is wrong with the camera. They will tell you, "you need a new screen and the chg's and labor are $190.00. The camera is only 3 yrs old and they won't recall this huge problem. You tell them, no don't fix it, I am going to contact BBB. Then you send a letter to BBB explaining what is going on and there are many complaints about this problem with this camera. BBB will contact Canon, Canon in return will call you and fix the camera for free. there ya go, takes a little bit of leg work, but hey...you just saved $190.00
How do you fix the shutter of a canon ae 1 camera?
Canon's A-series cameras were (and are) prone to developing a noisy squeal when the shutter is fired. The problem occurs when the lubrication on the mechanism dries out over time. The fix is to relubricate the offending parts. While there are instructions (available online; do a search) for doing this yourself, you can create worse problems if you get oil or grease where it doesn't belong. I've had cameras with the problem, but I chose to have a professional CLA (clean, lube, adjust) done to the camera. I have an ae-1, The shutter speed is the dial on the top right side with all the numbers and the word "program" on it. Program is idiot-mode: used just to snap shots. In bright daylight use higher speed like 1000 or 1600 and in darker situations use like like 100. anything under 60 requires a tripod, for a clear picture. The speed can be so slow, that camera will allow you to set the speed slow enough that it could take a full minute to take a picture.
Why is my Canon PowerShot lens stuck out and how can I fix it?
Your Canon PowerShot lens may be stuck out due to a mechanical issue or debris obstructing its movement. To fix it, try gently tapping the camera, turning it off and on, or manually adjusting the lens. If these methods don't work, consider seeking professional repair services.
How do i fix transmission shutter?
Go to Auto Zone, Pep Boys and buy shutter guard and pour it in the transmission
What troubleshooting steps can I take to fix the Canon Rebel Error 99 issue?
To troubleshoot the Canon Rebel Error 99 issue, try the following steps: Turn off the camera and remove the battery. Clean the lens contacts and camera body contacts. Check the memory card for errors and format it if needed. Update the camera firmware. Try using a different lens to see if the issue persists. Reset the camera settings to default. If the problem continues, contact Canon customer support for further assistance.
How can I fix motion blur in my photographs?
To fix motion blur in photographs, you can try using a faster shutter speed, increasing the ISO setting, or using a tripod to stabilize the camera. Additionally, you can use image editing software to sharpen the image and reduce the blur effect.
Where can one learn to fix a camera that was dropped in a puddle?
There are videos showing how to fix a dropped camera on ehow, however, if the camera does not work once it has been left to dry, it is unlikely that the camera will be fixable.
How can I fix the issue of black lines appearing on my camera screen?
To fix black lines on your camera screen, try cleaning the lens and screen, adjusting the camera settings, updating the camera software, or seeking professional repair if needed.
