answersLogoWhite

0

347V can be obtained from a three-phase power system, where the phase-to-phase voltage is 347V. This typically involves connecting three alternating current power lines that are 120 degrees out of phase with each other to create a three-phase circuit, which results in a higher voltage output than a single-phase system.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

What is a tri tap ballast?

A tri-tap ballast is a type of fluorescent light ballast that is designed to accommodate three different input voltages (120V, 277V, and 347V). This flexibility allows the ballast to be compatible with various power sources, making it useful in different settings where voltage requirements may vary.


Is the lamp for 347v same as 120v?

If you are asking about high intensity discharge lighting lamps, there are multi tap ballasts that can be use for these fixtures. These types of ballasts use a variety of voltages for supply side of the ballast. These voltages include 120, 240, 277, 480, 347 and 600 volts. The lamp used in these types of fixtures is the same regardless of what the supply voltage is rated at.


What is the typical 460 3 phase voltage 1 leg to ground?

230v 230v In a transformer with a primary connected to 480V Delta and a secondary connected in 480V Star connection, the coil voltages to the star point (ground) are 277 volts 480 / 1.73 = 277 volts. Other star connections are 208/120 (208/1.73 = 120V), 600/347 (600/1.73 = 347V). Because the phase angles are not 180 degrees apart they are not additive, they are 120 degrees apart which is why 1.73 factor comes into play.


Does fluorescent lamp work by DC voltage?

Fluorescent lamps can be used in the District of Columbia.If you were really asking if they can be supplied with direct current, the answer is yes, but they really don't like it. They prefer to be supplied with alternating current, or AC, so you'd have to "chop" the DC or use it to drive an inverter, which will change the DC into AC.There are florescent lamps and CFL's made specifically for 12 and 48 VDC applications available through specialty alternative energy stores.


Related Questions

What voltage is used in commercial area in Canada?

120v, 240v and 347v for lighting


Is 340V a three phase service?

600v is a three phase service, where 347v is the L-N voltage (if grounded).


What is a tri tap ballast?

A tri-tap ballast is a type of fluorescent light ballast that is designed to accommodate three different input voltages (120V, 277V, and 347V). This flexibility allows the ballast to be compatible with various power sources, making it useful in different settings where voltage requirements may vary.


Is the lamp for 347v same as 120v?

If you are asking about high intensity discharge lighting lamps, there are multi tap ballasts that can be use for these fixtures. These types of ballasts use a variety of voltages for supply side of the ballast. These voltages include 120, 240, 277, 480, 347 and 600 volts. The lamp used in these types of fixtures is the same regardless of what the supply voltage is rated at.


What should be the primisable voltage between neutral and earth in a three phase system?

It is the line to line voltage divided by 1.73. 600V / 1.73 = 347V 480V / 1.73 = 277V 380V / 1.73 = 220V 208V / 1.73 = 120V


What is the typical 460 3 phase voltage 1 leg to ground?

230v 230v In a transformer with a primary connected to 480V Delta and a secondary connected in 480V Star connection, the coil voltages to the star point (ground) are 277 volts 480 / 1.73 = 277 volts. Other star connections are 208/120 (208/1.73 = 120V), 600/347 (600/1.73 = 347V). Because the phase angles are not 180 degrees apart they are not additive, they are 120 degrees apart which is why 1.73 factor comes into play.


Does fluorescent lamp work by DC voltage?

Fluorescent lamps can be used in the District of Columbia.If you were really asking if they can be supplied with direct current, the answer is yes, but they really don't like it. They prefer to be supplied with alternating current, or AC, so you'd have to "chop" the DC or use it to drive an inverter, which will change the DC into AC.There are florescent lamps and CFL's made specifically for 12 and 48 VDC applications available through specialty alternative energy stores.