Make to chock the front tires and leave the emergency brake off. Jack the vehicle and remove the wheel. The drum is only held on by being squeezed between the hub and the tire, so when new they just slide right off. However, if you live in the rust belt you will have to beat the hell out of it with a hammer. First, get some good penetrating fluid like "PB Blaster" or "Liquid Wrench" and soak the area around the center hub and lugs. Second, try gently gently tapping on the studs (bolts) but be careful not to miss or you will bugger up the threads. If it still wont come off get a bigger hammer and hit it from the back, being careful not the damage too much while swinging away. Continue rotating the drum while beating on it so as to remove it evenly so it doesn't get wedged.
Remove the tire and wheel from your 2002 Chevy Malibu. Remove the brake spring and the brake caliper. The brake shoes will come off. Reverse the process to install the new brake shoes.
do I need brake pads or brake shoes for 1998 Chevy tracker
if you need to ask just take it to midas
If you want them to work properly, take it to the nearest Chevy dealership.
It your unfamiliar with basic brake work purchase a shop repair manual for that vehicle. It will save you time and money.
Remove the tire and wheel from your Mitsubishi. Remove the brake spring and the brake caliper. The brake shoes will come off. Reverse the process to install your new brake shoes.
you go to a liscenced garage, where they are qualified to do repairs on safety related components... period...
Replace shoes brake 2003 Chevy
need help installing brake shoes need diagram
Is there a special tool that is needed to remove and replace the brake shoes?
what tools i need to change the brake shoes for a cavalier 2003
Begin by removing the tire and wheel from your 1993 GMC. Remove the brake spring and the brake caliper. The brake shoes will come off. Reverse the process to install your new brake shoes.
The truck has 4 wheel disc brakes for stopping. There is a small hub on the rear disks for the parking brake shoes to engage. www.trailvoy.com
If your brake shoes are squeaking you need to take it to the nearest expert technician or mechanic which will tell you how to change your shoes and if you need to.
how to remove and fit rear brake shoes on a peugeot 206 1.1
Remove the tire and wheel. The brake shoes are held in place by a spring. Remove the brake shoe spring. The brake shoes will come off. Reverse the process to install the new brake shoes.
The truck has 4 wheel disc brakes. The parking brake uses the hub on the rear rotor with a small set of brake shoes inside for use as a park brake only. www.trailvoy.com
The brake rotors are warped are out of round. Need to do a brake job and have the rotors turned are replaced. Be sure to install new pads and shoes.
Its got disc brakes in the front, therefor brake pads and its got drum brakes in the back, therefor brake shoes
To change wheel cylinder on a 2000 Chevy Malibu, jack up the vehicle and remove the tires, brake drums and brake shoes. Spray the hydraulic line and fitting with CRC 5-56 and loosen hydraulic fitting. Remove the two mounting bolts and remove the wheel cylinder. Replace with new.
Remove the tire and wheel from your Chevrolet Avalanche. Remove the brake spring and caliper. The brake shoes will come off. Reverse the process to install the new brake shoes.
Start with an inspection and adjustment of the parking brake shoes by removing the rear brake rotors. If the brake shoes are good and they are adjusted up and you still need more adjustment, make final adjustments on the brake cables under the drivers side of the vehicle.
rear brake shoes are pretty much the same on all cars and truck. basically you remove the tire remove the brake drum retaining clips. unadjust the brake adjuster. this is doen by removing the plug on the back of the brake backign plate. then turn the star to let the brake shoes back off from the drum. once the pressure is off the shoes the drum will come off. then you remove the shoes by taking off the springs and stuff that hold the shoes on. putthe new shoes on and the drum. readjust the brakes with turning the star the other way. spin the drum to see if they are free or stuck if they are stuck you went too much. unadjust them to get them to where they barely rub. and you are done.