How do you get the window back on track in a 2005 Monte Carlo?

Answer 1

Not sure exactly what you are asking but if it is an issue with the wipers staying in the up position after you shut off the car it may be the same as my 2002. There is a metal tab located just under the pivot assembly where the stem from the wiper motor comes thru the sheet metal of the car. To get to it you will need to remove the plastic shroud that covers the mechanism. The tab is not easily recognizable since it is part of the sheet metal of the car. You should be able to figure it out with that information. To get a beter idea of what you are looking for have some one shut off the wipers after you have the shroud off so you can see how it will reverse direction when shut off. On the bottom side of the pivot arm on the wiper motor stem you will see a small gear that is made to catch on the tab that I mentioned at the begining. More then likely the tab has gotten bent down and away from that gear. you simply need to get a good sturdy screw driver and maybe a hammer and carefully bend the tab back up and in to catch the gear as it reverses. The gear is spring loaded so as it spins in the forward direction it will simply flex in allowing the wipers to work normally. Hope this helps. Elm 1351 @aol.com