If your CD player has a line out and your mixer has a line in ... then you're essentially done except for finding a cable with the right ends. Otherwise, it gets tricky enough that you might want to give more specifics.
We need additional information. What do you need to hook up to the mixer? Turntables, tape players, CD players etc.
You can only hook it up to that type of player if they have a USB output on them
Follow the instructions in the manual that came with the CD player. If you have no manual then you will need to find the instructions for the particular model you have.
Depending on the Mixer itself, you might hook it up to a multiple of things. DJ mixers are usually connected to 1 or more sources of sound. In most DJing set-ups, these imput items would be turntables or CD players. Depending on the amount of "inputs" the mixer has, you can add a variety of sources. On the "out" connection, the mixer is generally plugged into an amplifier so you will be able to hear the sound that is produced. You might also have a CD burner, PC, or other items connected to your "out" plugs.
CD ... AUX ... or Tape in. I just hooked mine up through the CD inputs (2/1/2012).
Buy a new radio and install it
adjustments and audio settings
by a CD player at walmart and correct dash kits and hookups for easy hook up .... done ..... i did it the celeb lives on !!
you can get you an rca jack and run it i doubt that cd player has rca inputs besides that it should be a breeze
hook up the wires to the factory harness and listen you little heart out
plug it in the free spot and hook it up to the conductor your powering it to
yes...you need to find the CD wiring harness adapter for that year model and it will hook right up