Pop off the plastic cover on the inside of the door, opposite the mirror. There are just a few bolts to unscrew, and a wire to unplug, and then the entire assembly just pops off. Pop off the plastic cover on the inside of the door, opposite the mirror. There are just a few bolts to unscrew, and a wire to unplug, and then the entire assembly just pops off.
if its the whole mirror you should be able to get to it from the inside door panel.its a star bit
how to install driver mirror
how to install Ford Ranger Driver Side View Mirror
One can program the mirror garage door opener on a Hyundai by pushing the home link button first and holding it. It will then flash slowly with a red light on the mirror. One second later, point the garage opener to the mirror and push the open button.
To install the Mitsubishi Eclipse driver mirror, you will need to remove the interior door panel on the driver's side. Then, remove the cover for the mirror screws. Remove the screws and wiring and remove the old mirror. Replace the wiring and screws as you add the new mirror to the car. Then place the cover and the door panel back on the vehicle.
Remove the inside door panel from your 1991 Chevrolet 1500 pickup truck. Remove the wiring harness from the mirror. Remove the driver side mirror retaining bolts. Reverse the process to install the new driver side mirror.
the mirror should just pop out, remove the two heating wires and install the new mirror
You need to remove the door panel. Remove the wires going to the mirror. Remove the nuts holding the side mirror. Reinstall in reverse order.
depending on the year of your santa fe. i am a service tech at a Hyundai dealership and i know that they do have a homelink mirror available for santa fe's which can be programmed to open garages/gates etc. . i would contact your local Hyundai dealer
If it's just the mirror glass itself - go to any good glass shop and they can cut you a piece to fit, and install it with the proper adhesive.
1. Remove the triangular trim piece from the inside of the door. 2. Remove the three screws that hold the mirror on. 3. Disconnect the wire connector. Reverse procedure to install.
It is possible if there is a mirror in the car. If the driver can see your eyes through the mirror, then you can also see the eyes of the driver.