0
To install a driver side window on a 1985 Fiero, first remove the door panel by unscrewing the screws and clips. Next, carefully detach the old window by removing any bolts or clips that hold it in place. Position the new window in the window track, ensuring it aligns properly, and then secure it with the necessary bolts or clips. Finally, reattach the door panel and test the window for proper operation.
What else can I help you with?
Does a 1985 Pontiac fiero 4 cylinder trans fit in a 1985 v6 Pontiac fiero?
Yes, sort of, The clutch is different.
Where is your fuel pump relay on your 1985 Pontiac fiero-2m4 se 5 speed?
On the firewall, directly behind the driver. There are two there. One of them is for the fuel pump.
Is a 1988 fiero wiring harness compatible with a 1985 fiero computer?
No the 1988 underwent a big upgrade
How do you replace driver side electric window motor on a 1985 Ford E-150?
To replace the driver side electric window motor on a 1985 Ford E-150, first, remove the door panel by unscrewing and unclipping it to access the interior components. Disconnect the wiring harness from the old window motor and unbolt it from the regulator. Install the new motor by securing it to the regulator and reconnecting the wiring harness, then reattach the door panel. Finally, test the window to ensure proper operation before finishing.
What is the Normal operating temperature for a 1985 Pontiac fiero?
About 185F.
What is the Recommended oil weight for 1985 v6 fiero?
5w30
What bolt pattern is the 1985 Fiero Sport Coupe?
5x100mm
Where is your fuel pump relay on your 1985 Pontiac Fiero gt 2.8 V6?
on the wall in the engine compartment direcly behind the driver side remove the air filter you will have easy access to it
What is 1985 Pontiac fiero worth?
for me there is no money it how much you love your car
How much did a 1985 Pontiac Fiero cost brand new?
about 10k
How do you install the starter in a 1985 Pontiac fiero?
Lift up the back of the car enough you so you can crawl and work on the front bottom of the engine.BE SAFE!Disconnect the battery negative connection. Most fiero starters have two wires and two bolts to hold them in.Undo the 9/16 or 15 mm bolts and gently hang the starter on the wires.Undo the small one first.Reverse to install.
How would one change the drivers side window motor on a 1985 GMC 1500 pickup?
i need a diagram to install a window motor on a 1980 gmc truck
