put the tank up in place and then use the 2 straps that hold it up and bolt the straps down and the tank is now in place, hook up the wire or wires to the fuel sending unit and your done.
The gas tank on the 2013 Dodge Dart holds 15.8 gal..
should be the same.
the tank is right underneath the trunk.
To change the fuel filter in a 2013 Dodge Dart Limited, first, ensure the vehicle is off and the fuel system is depressurized. Locate the fuel filter, which is typically integrated into the fuel pump module inside the fuel tank. Remove the fuel tank cover, disconnect the fuel lines, and unbolt the fuel pump assembly to access the filter. Replace the old filter with a new one, reassemble everything carefully, and check for any leaks before starting the vehicle.
not as far as I know.
it is inside of gas tank which has to be pulled, out, the rear seat has to removed also
Should be 16 gallons.
In the fuel tank.In the fuel tank.
In the fuel tank.In the fuel tank.
To install a fuel pump on a 3.3 Dodge Dynasty, first relieve the fuel system pressure by removing the fuel pump relay and running the engine until it stalls. Then, disconnect the battery and remove the fuel tank. Once the tank is out, unbolt the fuel pump assembly from the tank, disconnect the wiring and fuel lines, and replace the old pump with the new one. Reassemble everything in reverse order, ensuring all connections are secure before reconnecting the battery and testing the system.
It is in the fuel tank.It is in the fuel tank.
In the fuel tank.In the fuel tank.