The deck must be slipped beneath the machine from the left, the lift lever locked down and the rear hangers and front hanger plate attached. The belt will take take a 90 degree twist with the front part to the left side.
you were no help
reinstalling after blade exchange
Disingage the mower deck take off the mower deck look under neath their and replace the belt
Gates
To install a PTO clutch on a John Deere 345 lawn tractor, first disconnect the battery to ensure safety. Remove the mower deck and any necessary covers to access the clutch assembly. Unbolt the old PTO clutch, then position the new clutch in place, securing it with bolts. Finally, reconnect the wiring and reassemble the mower deck before reconnecting the battery and testing the clutch.
Is your STX 38 a black deck or yellow mower deck color?? Bob Lituri lituri54@aol.com
I have a Craftsman DYS 4500 and there is a nut under the left rear fender next to the tire that adjusts level. I'm still having trouble getting the deck tuned again despite my best effort with a bubble level, but that nut is definitely adjusted it.
yes
To change the mower belt on a Kubota Model RCK44LT, first, disconnect the mower from the tractor and ensure the ignition is off. Remove the mower deck by unhooking the lift arms and the drive belt. Then, take off the old belt by releasing the tension and sliding it off the pulleys. Install the new belt by threading it through the pulleys in the correct sequence, reattach the mower deck, and reconnect the lift arms. Finally, check the belt tension before operating the mower.
Different makes and models install differently. Please ask again with the make and model.
To install a deck belt on a Deutz Allis 1816 mower, first ensure the mower is turned off and the spark plug is disconnected for safety. Remove the deck by unfastening the mounting bolts and detaching any necessary brackets. Thread the new belt around the pulleys according to the mower's belt routing diagram, ensuring it sits properly in the grooves. Finally, reattach the deck, secure all fasteners, and reconnect the spark plug before testing the mower.
To install the idler spring on a 38-inch mower deck, first, ensure the mower is turned off and disconnected from power. Locate the idler pulley and the spring mounting points on the deck. Attach one end of the spring to the idler arm and the other end to the designated anchor point on the mower deck, ensuring it's securely in place. Finally, check the tension and adjust if necessary to ensure proper operation.