== ==
Make sure the power supply from the connector plug into the coil pack is correct and functioning. Also check the resistance of the coil pack with a digital ohm-meter to make sure it has no external or internal short circuits. If all this checks out OK, then the problem you are having is from somewhere else.
Make sure the power supply from the connector plug into the coil pack is correct and functioning. Also check the resistance of the coil pack with a digital ohm-meter to make sure it has no external or internal short circuits. If all this checks out OK, then the problem you are having is from somewhere else.
If you have a bad coil pack the bike will not run. Take a spark plug out and reattach the plug wire then hold it to a bare metal part of the motor so you can see the bottom of the plug. Try to start the bike and see if you have a spark on the plug. If you do then the coil pack is OK. If you don't it's probable bad.
what is the number coil pack
careful if you do not know never turn engine over next to coil be advised
Most automobiles will not start with a nonfunctioning coil pack. The coil pack will cause the spark plugs not to fire.
There is no coil wire. There is a coil pack and connected to the coil pack is the ignition control module.
Coil Pack
The purpose of a coil pack is to supply the spark to the spark plugs.
how to change coil pack on 1998 plymouth neon
Go to AutoZone have them rear your codes for FREE. This way you will know which Coil Pack is goig bad / or is bad. If you have a 4.6L you will have only 2 Big Coil Packs. If you have the 5.4L you will have 8 Coil Packs , One coil pack for each cylinder.