Building load is calculated by computing the volume of built masses and multiplying by standard weight. Divide it by the area of the surfaces of the masses which are touching the ground.
No, it is a dead load
well you build a bridge and get over it
stress is the ratio between the load and area
Before you can calculate the load bearing capacity of a scaffold, you will need to know there are three types of scaffolding; light duty, medium duty, and heavy duty. Now you can calculate the load bearing capacity by using the height to base ratio.
yes
A man with a load jumps from a high building. What will be the load experienced by him?
Divide the heat loss or gain obtained by the load calculation by square footage of the building.
The weight of the material X type of material, divided by the area of compartment?
By the number of suface area square feet. Check with the local Building Dept. for specs.
If this pool is indoors consult your local fire marshal for the restrictions on the building occupancy level
No, it is a dead load
well you build a bridge and get over it
There are several ways to calculate working load limit. One of these includes Minimum Breaking Load (MBL) divided by Working Load Limit (WLL) equals Working Load Limit (WLL).
no load voltage - full load voltage by full load voltage
lolz
You mean heat load? Use Manual J.
To calculate the DG set current, you need the load current and the load voltage. To convert it into kilowatts it is divided by 1000.