Want this question answered?
To get a roaring (blue) flame you simply turn the sleeve on the Bunsen burner's chimney to completely open the air hole under it. The new blue flame will be hard to see so close the air hole afterwards to make a visible flame.
I t happens as the heat makes the metal glow as it expands.
It is closed to make a safety flame.
You can make the flame hotter by first, lowering the flame from the starting point by slowly closing the gas valve until the flame is at a medium height. Then, you should increase the oxygen intake by slowly opening the oxygen valve until you have a completely non-luminous flame (an all-blue flame), which is hotter than an orange or yellow flame.
you make sure that the nosel is covered otherwise it wont be a safe flame
To get a roaring (blue) flame you simply turn the sleeve on the Bunsen burner's chimney to completely open the air hole under it. The new blue flame will be hard to see so close the air hole afterwards to make a visible flame.
By increasing the size of the opening at the base, allowing more oxygen to the flame. The hottest flame is the blue flame.
how do you make the flame on busen burner bigger
There is a lack of oxygen in the flame itself (most probably because of the air holes in the Bunsen burner or of your burning device) this effect would create a luminous flame (better known as a yellow flame). A kind of flame that does not burn as hot as a non-luminous flame (better known as a blue flame)
What colour the flame is has totally got to do with how much oxygen is allowed into the Bunsen, the flame can be anywhere between a bight orange to blue, all the way to being almost unnoticeable. This is what make them dangerous if unattended as you wont know there burning until you are. Low air easily visible flame, High air flow, and it becomes very difficult to see.
Your not hearing the flame your hearing the gas move through the burner. and it is louder because it takes more gas moving through (so gas moving faster) than it does for a flame that is not as hot.
if you are talking about what flame to use on a Bunsen burner than the yellow flame is to make sure that everyone knows that there is a flame but the blue flame (less visible) is used as the hotter flame and the better one.
Twist the collar at the bottom of the Bunsen burner to allow more oxygen to mix with the methane. This will produce a blue flame that is very hot and may be difficult to see, so be careful.
I t happens as the heat makes the metal glow as it expands.
Turn the collar and the flame will get hotter
I'm only in Yr 7 and i know,anyways the characteristics are what it contains a safety flame is when the flem is on and orangey colour and is not as hot as the blue flame.For example you are using a Bunsen burner (you gotta have used a Bunsen burner at least once at scholl cause i have,any ways the blue flame is always hotter than the orangey flame (the safety flame) because to make a blue flame you need to open the Bunsen burner jacket to let oxygen pass through.Sp the characteristics are that the safety flem is an orangey cour as oppsed o the blue flame,which is also much hotter than the safety flame.
It is closed to make a safety flame.