You buy the UF powder or granules and mix it with water.
this is the poly-condensation reaction of urea and formaldehyde at acidic medium ..this is milky type productive used as adhesive in plywood industry.
It was a urea-formaldehyde glue called 'Aerolite' .
Generally, urea formaldehyde glue.
No,carpet urea is urea formaldehyde it is aproduced by treating urea with formaldehyde
The laboratory preparation of urea-formaldehyde with melamine formaldehyde resin added is meant to modify the urea-formaldehyde resins in order to get good performance with a low formaldehyde emission. The optimal percentage of the melamine resin is 20 percent of the entire solution.
Resorcinol is a phenol formaldehyde resin, black in colour. It is a marginally less toxic but more expensive alternative to Urea Formaldehyde glue. ...www.rainforestinfo.org.au/good_wood/glue.htm - 7k - Cached - Similar pages - Note thisHope this helps - Rob Crick
UREA-METHANL
UREA-METHANL
Urea-formaldehyde is a non-transparent thermosetting resin or plastic, made from urea and formaldehyde.It used in adhesives, finishes, Medium-density fiberboard (MDF), electrical components and sometimes molded into objects. Urea-formaldehyde is also known as urea-methanal. Because it is formed by chemical reactions with formaldehyde is can be an environmental hazard and there is particular concern regarding indoor air quality. Virtually all modern houses and buildings will have some material made with urea formaldehyde. The problem occurs when the chemical reactions involved in manufacture do not completely use the formaldehyde chemical. This has been a serious problem in the past when production processes were shoddy. It is part of the air quality standards of the US Environmental protection Agency.
Phenolic resins are made from chemicals of the phenol group while urea formaldehyde resin are made from urea and formaldehyde. These two resins have different properties.
It is poisonous
Thermosetting