Bullets are primarily measured by the diameter (caliber) and their weight.
Calibers can be expressed in hundredths or thousandths of an inch or in millimeters -- typical small arms calibers range between .17 to .50 inch caliber or about 4.4 to 12.7 mm caliber.
Weight is expressed in grains or grams. There are 7000 grains to a pound. bullet weights for small arms can range from as low as 20 grains to over 800 grains.
Caliber is simply the diameter of the bullet in the cartridge. It can be expressed in hundredths or thousandths of an inch, such as .40 or .45, or it can be expressed in millimeters, such as 9mm or 10mm. As far as actually physically measuring it, the bullet's diameter can be measured with a caliber gauge.
This question is extremely vague and poorly worded. I'm assuming you meant to ask, "How do you measure the chambering of a gun?" That means how do you figure out what sort of ammunition goes into the gun.
Ammunition can be measured in two ways. There's a millimeter system and caliber system. Example: A large portion of modern pistols are chambered in 9mm.
Example: This rifle takes 7.62x51mm. ammunition. That means the barrel is .30 and the shell casing is 51 mm long.
Note on the above example ".30" is generally pronounced "thirty-caliber."
It depends on the bullet. A 7.62 round is 7.62 mm in diameter, and a 303 is 0.303 inch in diameter and a 22 bullet is 0.22 inch diameter.
Bullets are measured by their diameter; either in millimeters or hundredths or thousandths of an inch. For Example: A 5.56mm bullet is the same diameter as a .223" bullet.
Usually in Feet per second, or FPS. If you do the math right, you can convert it into M.P.H. 1000 FPS = 681.1 M.P.H
It depends on what you are measuring! Distance is measured in metres Time is measured in seconds Mass is measured in kilogrammes Volume is measured in litres Force is measured in newtons Energy is measured in joules Temperature is measured in kelvin Power is measured in watts Electromotive force is measured in volts Electric current is measured in amperes ...and so on
Cup is measured by volume. It is measured in ml.
they are measured by................
It can be measured by volume
Mass is measured on anything it can be measured on so it cant be
the measurements of a round are not measured in that way, nor does the size of the gun have anything to do with how powerful it is
Propellant can be measured by weight or volume.
Comes in cans. Measured by weight or volume
Time to cover a measured distance, or a radar gun.
Gun powder is typically measured by weight, using the grain as a unit of measure. There are about 15 grains to one gram.
There are 7,000 grains in one pound of gun powder. Grains are measured at 437.5 grains per ounce.
That will depend on the type of gun (revolver versus rifle, etc) how many times it was fired, and what the hands were exposed to after the firing. It is typically measured in days.
Barrel length is measured from the bolt face to the end of the barrel.
Speed is measured by distance traveled divided by time taken. These radar guns measure exactly how far the ball goes within a time frame.Ê
Depends on which law you violated, in which area, and which gun. I would strongly suggest you need a lawyer, and not WikiAnswers. The answer is most likely measured in years.
Measured from the breech to the crown of the barrel, it must measure at least 18 inches.
They range from 80 to 110 db, depending on the type or cap and the distance from the ear its being measured to.