Your local pool supply store sells a product called...
Chlorine neutralizer!
Pool & Spa
In order to maintain this type of pool, you need more than just to dump the chlorine there. In addition to the chlorine, you will also need to add a few other chemicals to ensure that the right pH of the pool is maintained. Bear in mind that the pH level is very important. If it is too high, the chlorine will not be able to do its job well. If it is too low on the other hand, it becomes very acidic, which is not ideal for swimming.
Thiosulfate will neutralize chlorine. Buy it at a pool store.
There is chlorine shock and non chlorine shock. Fo chlorine shock, which is the normal shock, it is the same a s Chlorine but unstabilized, so it will not last in the pool very long.
Simple one actually. You use Potassium Monopersulfate, more commonly known as Non-Chlorine Shock. Applied to the pool at the rate of 2 lbs. Per 10,000 gal.. Repeat daily for 2 to 3 days and there you go. Chlorine neutralized. Sorry, I can't agree with that answer. Potassium monopersulfate is a non chlorine shock used to oxidize chloramines. If you have too high levels of chlorine in your pool you can neutralize some by adding sodium thyosulfate.
Use a chlorine reducing agent. You can get them at the pool supply. One is called After Shock, but there are others.
Keep residual chlorine down to 1 or 2. Use a non-chlorine (oxygen based) shock.
Thiosulfate will neutralize chlorine. Buy it at a pool store.
There is chlorine shock and non chlorine shock. Fo chlorine shock, which is the normal shock, it is the same a s Chlorine but unstabilized, so it will not last in the pool very long.
Simple one actually. You use Potassium Monopersulfate, more commonly known as Non-Chlorine Shock. Applied to the pool at the rate of 2 lbs. Per 10,000 gal.. Repeat daily for 2 to 3 days and there you go. Chlorine neutralized. Sorry, I can't agree with that answer. Potassium monopersulfate is a non chlorine shock used to oxidize chloramines. If you have too high levels of chlorine in your pool you can neutralize some by adding sodium thyosulfate.
No, pool shock is normally a really strong chlorine and stabilizer is like sunscreen for the chlorine
try it out and tell me
Use a chlorine reducing agent. You can get them at the pool supply. One is called After Shock, but there are others.
To shock a pool is to effectively increase the chlorine dosage to the max in order to exterminate a bacterial or algae problem.
It,s easy. Just Shock your pool with a chlorine shock and then make sure the chlorine level is where you need it to be. It, more involved if you go from Chlorine to Bacqucil. but why would you want to Bacqucil is so much nicer and easier.
normally when there is no reading for chlorine means that you need it, put 1 gallon of liquid shock in your pool. that will raise the chlorine level, cheryl
Stop adding salt to the pool and use tablets and shock when needed.
go to the local market that you get chlorine at and pool shock. buy test strips that test the water's chlorine, and just add an extra chlorine tablet each time you add chlorine. if its still really low and not even close to the amount you may want to add pool shock
The easiest way is to use 4 lb of non-chlorine shock. Hatawa