To open the hood on a 2001 Toyota MR2, first, locate the hood release lever inside the car, which is typically found on the driver's side, near the footwell or under the dashboard. Pull the lever to release the hood latch. Then, go to the front of the car, slide your hand under the center of the hood to find the secondary latch, push it to the side, and lift the hood. Make sure to secure the hood with the prop rod if equipped.
To replace the engine hood release cable on a 2001 Toyota MR2 Spider, first, open the hood and remove the latch assembly by unscrewing the bolts that secure it. Then, detach the old cable from the latch and pull it out through the firewall, taking note of how it’s routed. Install the new cable by threading it through the same path and connecting it to the latch assembly. Finally, reattach the latch and test the new cable to ensure it operates smoothly.
In the 1991 it's under the hood, remove the spare tire and black plastic case, on the left. May help...
under the hood behind the spare tire.
If you are wondering where it is located, it is under the hood, underneath the spare tire.
Behind the drivers seat there is a switch
6.5 in components in the doors. That's it.
timing chain
the factory amp on a 91 mr2 is in the rear kick panel behind the drivers seat above the hood latch behind that panel
The Toyota mr2
In the hood behind the spare tire.
In the Toyota MR2, the battery is located in the front trunk compartment, which is accessible by opening the front hood. This design is part of the MR2's mid-engine layout, allowing for better weight distribution. To access the battery, you may need to remove any covers or panels that are in the way.
There is a lever under the dash on the driver's side, near the footrest.