All the notes are open!
Start with G (it's the second lowest open note)
You also need to play one partial up from that (C)
Another partial higher (E)
And the one above that (G)
G G C ...
G C E ...
G C E, G C E, G C E...
C, E, G...
G, E, C...
G, G, C.
For the sheet music see the related link.
I'm assuming you know the rhythm of taps. It starts on a G on the second line(for Clarinet, F for concert pitch), and continues with your C, and E. Then your G, space directly above the staff, and back down. So: G G C G C E G C E G C E G C E E E G G E C G G G C G G C Hopefully that'll help. If it doesn't you can play the Trumpet's music. You're both B-flat instruments.
You transpose it and play it an octave lower. Still gets the same point across - and just as meaningful.
Sheet Music found here:
http://www.tapsbugler.com/24NotesExcerptphotos/15.-24Notes.jpg
Since it's a tune that can be played based on harmonic series, you can play taps "open" which is how it's usually played. To play in a lower key you can simply use valves 1 and 2 or even 1 and 3 pushed down the whole time and play it just as if you were playing it open.
it is easy because all the notes are open. just start at the g in the staff, move to c, then to the g above the staff, then up to the next open note. then you play it in reverse going down. hope i helped
Just like you would on a trumpet. There is no difference.
The notes are as follows:
Bb Bb Eb
Bb Eb G
Bb Eb G Bb Eb G
thats as much as i can figure out
I'm lookin for the same answer you are, buddy.
If using a B-flat trumpet, to play Taps in G, hold down the 1st and 2nd valves the whole time.
no
It is called "Taps", and it's on the Bugle. not the Trumpet.
As a general rule, when a part indicates "Trumpet" it is for the b-flat trumpet, so there is no difference. Depending on where you play, you may sometimes see a part for "trumpet in C" or some other key, but unless you play in a symphonic orchestra, that isn't all that common.
a B flat trumpet will tune to an A by playing a B. A C trumpet will tune to an A by playing an A.
If using a B-flat trumpet, to play Taps in G, hold down the 1st and 2nd valves the whole time.
Yes it works out fine
no
B flat
On a standard B-flat trumpet B is played with the second valve and A is played with 1-2.
The best trumpet is a Bach, i recommend a B flat trumpet made by Yamaha if your not a professional. always go with a B flat trumpet though.
Some do, but most trumpets are in B-flat.
It is called "Taps", and it's on the Bugle. not the Trumpet.
B-Flat
how do u do the d in trumpet
The most common trumpets are in B flat, if they aren't B flat it will say at the begging of the name for example the"E flat trumpet"
As a general rule, when a part indicates "Trumpet" it is for the b-flat trumpet, so there is no difference. Depending on where you play, you may sometimes see a part for "trumpet in C" or some other key, but unless you play in a symphonic orchestra, that isn't all that common.