answersLogoWhite

0


Best Answer

2006ToyotaKeyless Entry Programming Instructions 1. Start with the key out of the ignition, drivers door is open all others closed and

drivers door is unlocked. 2. Perform these steps within 5 seconds.

A. Insert the key into the ignition (Do NOT Turn) Pull key out.

B. Insert the key into the ignition (Do NOT Turn) Pull key out. 3. Perform these steps within 40 seconds.

A. Close then open the drivers door.

B. Close then open the drivers door.

C. Insert the key into the ignition (Do NOT Turn) Pull key out. 4. Perform these steps within 40 seconds.

A. Close then open the drivers door.

B. Close then open the drivers door.

C. Insert the key into ignition and leave it in ignition.

D. Close the driver's door.

E. Turn the ignition to ON (Do NOT Start) then back to OFF.

F. Remove the key from the ignition. 5. Within 3 seconds, the power door locks should lock then unlock automatically

indicating successful entry into programming mode.

Return to step 1 if the locks do not cycle at this point.6. Perform these steps within 40 seconds.

A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.

B. Immediately after letting go of the lock and unlock buttons,

Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door

locks should lock and then unlock once indicating successful programming. If

the door locks cycle twice, repeat steps A and B in step 6 as the remote was

not accepted.

C. Repeat steps A and B in step 6 for each new remote.7. Open drive's door.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you program 2006 Toyota Camry keyless remote?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you program a key less entry remote for Toyota Camry 2011?

You have to have the dealership program a key less entry remote for 2011 Toyota Camry.


How do you program the remote for a 2008 Toyota Camry?

I can't add it


How do you program a keyless remote for 2007 Camry?

That depends on kind of key you have. Smart keys need TIS Toyota software and special cable also activation for key replacement.


How do you program a remote on a 1999 Toyota Camry?

http://www.automotivehelper.com/topic360771.htm


How do you program the fob remote keyless entry on a 2000 Toyota Camry?

Check your owners manual. If you don't have one check related link below. You may have to register as a Toyota owner / exc. to be able to get access. Hope this helps


Where is the remote receiver on a Toyota Camry?

remote receiver


Do Toyota Camry's have keyless remotes?

Some of it does but not all models.


How do you determine if Toyota Camry has keyless remote capability?

Read the owners manual if you have it. There are many web sites that sell replacement remotes. I just purchased one for my 2004. Toyota $130. Web site $39.95. Any supplier should be able to tell you if your Camry came with the remote door opening feature.


How do you program a transponder key for a 2007 Toyota Camry?

You can't. Only a Toyota dealer can program the transponder key as it has a chip inside the key and has to communicate with the engine in order to start the car. Toyota dealer charges 1/2 hour of labor about $42 to program. Now the remote is easy...but not the key.


How do you program the transponder key in 2012 Camry?

how to program 2012 toyota fortuner


How do you Program 2007 Toyota Camry?

what is the step by step process for programming a key for a 2007 Toyota camry for the lock,unlock,trunk


Will broken keyless entry key for 2007 Toyota Camry keep it from starting?

If you have immobilizer in your car, sure it will prevent your from starting.