This is the procedure for a 1999 GMC Sierra SLT (New body style) it should be the same. 1. Start with the ignition OFF, hold down the power unlock button on the door panel. Turn the ignigtion key ON, OFF, ON, OFF. Release power unlock button on the door panel. The locks will cycle once. 2. Hold down the key FOB lock AND unlock buttons for 15 seconds. The locks will again cycle once. 3. Repeat step #2 for each additional FOB.
4. Turn the ignition on to exit the FOB programming mode. Programming is now complete. Hope this helps!!
The dealer scan tool is required to program a remote.
That info MAY be at programyourremote.com (program your remote.com)
programyourremote.com simply put.. "Program Your Remote.com"
In order to program a VW Gold 2002 keyless entry, you would need the metal key flip, keyless entry remote and the immobilizer chip. Once you program the three components, you would have to program the immobilizer chip separately.?æ
this a lot of bs, please unsubsrcibe me from your site.
See FOB PROG (Remote Keyless Entry Transmitter Programming) on page 2-29 of your "Owner's Manual", under Section 2: Features and Controls - Vehicle Customization Settings.....
purchase two keyless remotes without instruction. How do you program them for a 2002 Pontiac Bonneville
See "Programming the Transmitters" on page 10 in chapter 2 "Keys and Doors" of your "OWNER'S MANUAL".....
Your keyless remote might not work for your 2002 Chevy Tahoe because the battery in the remote is dead. You can replace this battery by prying the remote cover off of the back of the remote or by removing the screws holding the cover closed.
No.
One reason that a keyless entry remote will not open the doors is a dead battery, either on the vehicle or the key itself. Another reason is that the remote needs to be reprogrammed.
Needs remote starter installed